top of page

Clean System Equipment

Mini bit cylinder MBDA (clean equipment)

MBDA_ALL.jpg

Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)

Multi mount cylinders (clean equipment)

CS-BDA_ALL.jpg

Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.

Basic cylinders: With guide (clean equipment)

CS-BCG_new.jpg

Φ8 to 40 mm [0.315 to 1.575 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option.

Jig cylinder low-friction specification CDAZ (clean equipment)

CS-CDA_ALL.jpg

Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation

Jig cylinder with guides (clean equipment)

CS-SGDAQ_ALL.jpg

Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability.

Twin rod cylinder TDA (clean equipment)

CS-TDA_ALL.jpg

Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder.

Flat rodless (clean equipment)

MRV_ALL.jpg

Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation.

Piston type RAP (clean equipment)

CS-RAP_ALL.jpg

Rack-and-pinion type clean room specification rotary actuator.

Pen cylinder PBDA (clean equipment)

PBDA_ALL.jpg

Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. A lineup of double acting types and single acting push types.

Double acting type basic cylinders (clean equipment)

CS-BC_new.jpg

Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving.

Jig cylinder C series (clean equipment)

CS-CDA_ALL.jpg

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for total space saving.

Slim cylinders (clean equipment)

CS-DA_ALL.jpg

Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep.

Mini guide slider MGA (clean equipment)

CS-MGA_ALL.jpg

Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs.

Twin rod cylinders (clean equipment)

CS-TBDA_ALL.jpg

Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration.

Air hands NHBDPG (clean equipment)

CS-NHBDPG_ALL.jpg

Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification.

bottom of page