Search Results

Previous View PDF Catalogue Vacuum generator Vacuum equipment, pad Micro ejector FME series Energy saving and silent micro ejector. World-class level low noise (when low-noise type muffler is used), 20% lower air consumption (compared with past Koganei models). Low pressure specification lineup also available. Next SIMILAR PRODUCTS Vacuum equipment, pad Vacuum generator Convert pressurized air to vacuum in one touch. ■ Wide range of vacuum variations • Standard specifications: Generates high vacuum from a supply pressure of 0.5 MPa [73 psi] • High flow rate specifications: Generates nearly 1.7 times standard from a supply pressure of 0.5 MPa [73 psi] • Low pressure specifications: Generates vacuum equal to standard specifications from a supply pressure of 0.35 MPa [51 psi] Inline Ejector PME Series Inline Ejector PME Series Energy saving and silent micro ejector. World-class level low noise (when low-noise type muffler is used), 20% lower air consumption (compared with past Koganei models). Low pressure specification lineup also available. Micro ejector FME series Micro ejector FME series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Standard type Cylinder Twin Rod TDA6 Series TDA6 Single acting push out type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring. Double acting long bushing type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. End keep double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Next SIMILAR PRODUCTS Cylinder Standard type Φ 20 to 40 mm [0.787 to 1.575 in] cylinder bore. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. DV - Valpack Double Acting Type Slim Cylinder DV - Valpack Double Acting Type Slim Cylinder BDAV Series Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs. Vacuum Pad with Multi mount Cylinders Vacuum Pad with Multi mount Cylinders Double acting type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong double acting type cylinder that meets JIS standards. Double rod type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. Double acting type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Double acting type, steel tube specification. Double rod type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Steel tubing Φ180 to 250 mm [7.087 to 9.843 in] cylinder bore. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. KSD Cylinder KSD Cylinder TDA6 Single acting push out type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring. Double acting long bushing type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. End keep double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Twin Rod TDA6 Series Twin Rod TDA6 Series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs. Multi Mount Cylinders BDA series Multi Mount Cylinders BDA series Knock cylinders NDA series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with integrated return spring. Integrated spanner flats enable secure mounting. Knock Cylinders NDA series Knock Cylinders NDA series Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms. Pen Cylinder PBDA Series Pen Cylinder PBDA Series TBDA - Double acting type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin Rod TBDA (Standard type) Twin Rod TBDA (Standard type) Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design. Twist Cylinder RHDA Series Twist Cylinder RHDA Series DDA - Double acting type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. Double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Non-rotating double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. Non-rotating double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. Double acting pull stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Valpack double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DYNA Cylinders DYNA Cylinders Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. High Multi Cylinders YMDA series High Multi Cylinders YMDA series Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini Bit Cylinders MBDA series Mini Bit Cylinders MBDA series Jig cylinder CDA series ● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations. Jig cylinder C series stroke adjustment type ● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear. Jig cylinder C series low-friction cylinders ● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving. Jig Cylinder CDA Double Acting Type Jig Cylinder CDA Double Acting Type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations. Slim Cylinder DA Series Slim Cylinder DA Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Water processing device Water processing device DB scale separator New water processing for clean tower circulation water. Water purification with new electrolysis technology, without using chemicals. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. Next SIMILAR PRODUCTS Water processing device Water processing device New water processing for clean tower circulation water. Water purification with new electrolysis technology, without using chemicals. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. DB scale separator DB scale separator Water purification device with new electrolysis technology, without using chemicals incorporated into a small module. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. DB scale separator: Module type DB scale separator: Module type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Vacuum pads Vacuum equipment, pad KPT Series Vacuum pads: Bellows type 10 mm [0.394 in], 15 mm [0.591 in], 20 mm [0.787 in] size diameter lineup. Bellows type that is perfect a workpiece with a slanted suction surface or when there are level differences in the workpiece. Next SIMILAR PRODUCTS Vacuum equipment, pad Vacuum pads Vacuum pads: Bellows type 10 mm [0.394 in], 15 mm [0.591 in], 20 mm [0.787 in] size diameter lineup. Bellows type that is perfect a workpiece with a slanted suction surface or when there are level differences in the workpiece. KPT Series KPT Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Solenoid Valve Internal Pilot Valve Solenoid valve 300 series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication. Next SIMILAR PRODUCTS Valve Solenoid Valve Internal Pilot F10M_P - F10 Split Manifold Type Plugin Type ● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease. F15M_P - F15 Split Manifold Type Plugin Type ● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease. F10M_P / F15M_P - Split Manifold Plug in Type - F10, F15 Series F10M_P / F15M_P - Split Manifold Plug in Type - F10, F15 Series Perfect for operation control of small-size actuators with a double acting or single acting cylinder bore sizes of 6 to 20 mm [0.236 to 0.787 in]. 030 / H030 series 030 / H030 series Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single (two-position double solenoid specifications only). PA / PB Series PA / PB Series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. A wide variety of lead wire connections and stacking manifolds. Solenoid valve 240 series Solenoid valve 240 series A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 180 series Solenoid valve 180 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 112 series Solenoid valve 112 series A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 110 series Solenoid valve 110 series This product has received an order corresponding to for maintenance . Please contact your nearest sales office for more information . Solenoid valve 040 series Solenoid valve 040 series Solenoid valve F10 Series for cylinder bore sizes of 20 to 50 mm [0.787 to 1.969 in]. 10 mm [0.394 in] valve width. World's first valve to be equipped with reducer size fitting. A wide range of manifold specifications to meet user needs. F10 Series F10 Series Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve. Solenoid valve 010E1 series Solenoid valve 010E1 series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication. Solenoid valve 300 series Solenoid valve 300 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 182 series Solenoid valve 182 series For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value. Solenoid valve JA series Solenoid valve JA series F10, F15, F18 Series. Low current type & single dual use valves offer energy saving and low price. 100+ million cycle life tested and rated directional control valve series that can switch direction of the cylinder ports and from double to single solenoid without any additional parts needed. The Selection Guide provides a summary of the 132 F Series – Indirect Acting Solenoid Valves. The F Series variations include: Direct Wiring, D-Sub, Flat Cable or Serial Communication Inline, Subbase, Mono Block and Split Type Manifold Switchable Output Ports Direct on Valve or Manifold Field Selectable Single or Double Solenoid Operation Available with Two 3-way Valves in One Body RoHS Compliance Solenoid Valve F Series Solenoid Valve F Series For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control. EA / EB Series EA / EB Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

KOGANEI water processing devices, including the DB scale separator, utilize innovative electrolysis technology for chemical-free water purification. Designed for clean tower circulation water, these devices operate with low energy to reduce CO2 emissions and cleaning costs. Covering in Singapore, Malaysia, Indonesia, Australia, and New Zealand, Koganei Asia delivers efficient and eco-friendly water treatment solutions with a range of additional benefits. Water processing device Water processing device DB scale separator View New water processing for clean tower circulation water. Water purification with new electrolysis technology, without using chemicals. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. DB scale separator: Module type View Water purification device with new electrolysis technology, without using chemicals incorporated into a small module. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits.

Previous View PDF Catalogue Solenoid Valve Internal Pilot Valve Solenoid valve 010E1 series Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve. Next SIMILAR PRODUCTS Valve Solenoid Valve Internal Pilot F10M_P - F10 Split Manifold Type Plugin Type ● For cylinder bore sizes of 20 to 40 mm [1.575 to 30150 in]. 10 mm [0.394 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease. F15M_P - F15 Split Manifold Type Plugin Type ● For cylinder bore sizes of 40 to 80 mm [1.575 to 3.150 in]. 15 mm [0.591 in] valve width and wire saving type manifold. Addition of wiring enables simple manifold increase or decrease. F10M_P / F15M_P - Split Manifold Plug in Type - F10, F15 Series F10M_P / F15M_P - Split Manifold Plug in Type - F10, F15 Series Perfect for operation control of small-size actuators with a double acting or single acting cylinder bore sizes of 6 to 20 mm [0.236 to 0.787 in]. 030 / H030 series 030 / H030 series Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single (two-position double solenoid specifications only). PA / PB Series PA / PB Series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. A wide variety of lead wire connections and stacking manifolds. Solenoid valve 240 series Solenoid valve 240 series A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 180 series Solenoid valve 180 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 112 series Solenoid valve 112 series A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 110 series Solenoid valve 110 series This product has received an order corresponding to for maintenance . Please contact your nearest sales office for more information . Solenoid valve 040 series Solenoid valve 040 series Solenoid valve F10 Series for cylinder bore sizes of 20 to 50 mm [0.787 to 1.969 in]. 10 mm [0.394 in] valve width. World's first valve to be equipped with reducer size fitting. A wide range of manifold specifications to meet user needs. F10 Series F10 Series Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve. Solenoid valve 010E1 series Solenoid valve 010E1 series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication. Solenoid valve 300 series Solenoid valve 300 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 182 series Solenoid valve 182 series For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value. Solenoid valve JA series Solenoid valve JA series F10, F15, F18 Series. Low current type & single dual use valves offer energy saving and low price. 100+ million cycle life tested and rated directional control valve series that can switch direction of the cylinder ports and from double to single solenoid without any additional parts needed. The Selection Guide provides a summary of the 132 F Series – Indirect Acting Solenoid Valves. The F Series variations include: Direct Wiring, D-Sub, Flat Cable or Serial Communication Inline, Subbase, Mono Block and Split Type Manifold Switchable Output Ports Direct on Valve or Manifold Field Selectable Single or Double Solenoid Operation Available with Two 3-way Valves in One Body RoHS Compliance Solenoid Valve F Series Solenoid Valve F Series For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control. EA / EB Series EA / EB Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue CCDA - Double acting long stroke type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. Next SIMILAR PRODUCTS Consolidates electrical signals from the end of devices and enables communication with higher-level systems I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Transport type Cylinder Slit type ORC63, 80 Rodless cylinder Φ63 to 80 mm [2.480 to 3.150 in] cylinder bore. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Next SIMILAR PRODUCTS Cylinder Transport type Double acting type with double guide Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Double acting type with integrated guide Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Slide Table B Type AGT series Slide Table B Type AGT series Standard specifications Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Slit Type MRB Rodless Cylinder with Integrated Guide Slit Type MRB Rodless Cylinder with Integrated Guide Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity magnet type with two linear guides. Shock absorber unit equipped as standard. Magnet type MRW Rodless cylinder with linear guide Magnet type MRW Rodless cylinder with linear guide Magnet type with guide MRG Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRG Flat Rodless cylinder Magnet type MRG Flat Rodless cylinder Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Unique oval barrel design enables low speed performance impossible before now. Magnet type MRV Flat Rodless cylinder Magnet type MRV Flat Rodless cylinder Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Slit type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Slit type ORS Rodless cylinder with linear guide Slit type ORS Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Smooth operation of the rolling bearing of the cam follower guide. Wide rail maintains high accuracy over the long term. Slit type ORK Rodless with cam follower guide Slit type ORK Rodless with cam follower guide Φ63 to 80 mm [2.480 to 3.150 in] cylinder bore. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC63, 80 Rodless cylinder Slit type ORC63, 80 Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Original flat piston mechanism set a new low cost, short, and thin standard for rodless pistons. Combination with the linear guide enables a low center of gravity and smooth operation. Slit type ORV Rodless cylinder Slit type ORV Rodless cylinder Fixed Table Type SUT Fixed End Plate Type SUP Fixed Rail-on Plate Type SUL Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Double acting type End keep type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Slide Unit SUT SUP SUL series Slide Unit SUT SUP SUL series Standard specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Slit Type ORB Rodless Cylinder with Integrated Guide Slit Type ORB Rodless Cylinder with Integrated Guide Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Magnet type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Magnet type MRS Rodless cylinder with linear guide Magnet type MRS Rodless cylinder with linear guide Magnet type MRC Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRC Flat Rodless cylinder Magnet type MRC Flat Rodless cylinder Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity slit type with two linear guides. Shock absorber unit equipped as standard. Slit type ORW Rodless cylinder with linear guide Slit type ORW Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORGA Rodless cylinder Slit type ORGA Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORCA Rodless cylinder Slit type ORCA Rodless cylinder Φ10 mm [0.394 in] cylinder bore size. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC10 Rodless cylinder Slit type ORC10 Rodless cylinder RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Low speed cylinder Cylinder Jig cylinder C series (low-speed specification) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Next SIMILAR PRODUCTS Cylinder Low speed cylinder Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Twin rod cylinders (low speed specification) Twin rod cylinders (low speed specification) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Pen cylinder (low speed specification) Pen cylinder (low speed specification) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Jig cylinder with guides (low speed specification) Jig cylinder with guides (low speed specification) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Jig cylinder C series (low-speed specification) Jig cylinder C series (low-speed specification) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Multi mount cylinder (low speed specification) Multi mount cylinder (low speed specification) -Double acting type: ● Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. -Double acting block type: ● Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore Slim cylinders (low speed specification) Slim cylinders (low speed specification) Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Perfect for slow, smooth low-speed transport. External dimensions of each cylinder are the same as standard products. Jig cylinder with guides φ6,8.10 (low speed specification) Jig cylinder with guides φ6,8.10 (low speed specification) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

KOGANEI Asia leads in manufacturing factory automation and labor-saving solutions across Singapore, Malaysia, Brunei, Indonesia, Australia & New Zealand. Product range includes ionizer, air cylinder, air valve, gripper, filter regulator, fitting, vacuum pad, ejector, shock absorber, rotary actuator, pressure gauge, sensor, pulse blow gun, fluororesin and environmental equipment. We also offer brands from Humphrey, New Era, Fujikura, Unipulse, Pisco & Yamaha Robotics. Support Discontinued Models Shock absorber model selection Air cylinder model selection nil nil nil nil nil nil nil nil nil

Previous View PDF Catalogue With guides Cylinder Mini guide sliders MGA series Double acting type Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom. Side mounted double acting type Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping. Double acting type with side-mounted buffer Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer. Double acting type with end keep Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Back side piping specification Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available. Back side piping specification with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Double acting type with stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with output side and input side stroke adjustments Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side and input side stroke adjustment buffers Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end. Double acting type with buffer and end keep Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Next SIMILAR PRODUCTS Cylinder With guides Double acting bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less. Double acting bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less. Double acting long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less. Double acting double rod bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less. Double acting double rod bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less. Double acting double rod long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less. Axis cylinder XDA series Axis cylinder XDA series Double acting type with guides Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output. Shock absorber type with guides Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. A shock absorber at the stroke end absorbs end impact force and allows stroke adjustment. End keep type with guides Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Rod slider ARS series Rod slider ARS series Cylinder sensor compatible type with guides Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Linear guide equipped in a square body provides space savings and non-rotating accuracy. High multi cylinders YMDAG series High multi cylinders YMDAG series Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Thin actuator with linear guide. Twin rod for high output. Z sider ZS series Z sider ZS series Double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of standard jig cylinders with guides. Easy to use, saves space. Stroke adjustment double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of stroke adjustment type standard jig cylinders with guides. Double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions. Stroke adjustment double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. With adjuster mechanism that can be used to limit the output side stroke. Jig cylinder with guide that is now even easier to use. End keep double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Jig cylinder with guide SGDA series Jig cylinder with guide SGDA series Double acting type Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom. Side mounted double acting type Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping. Double acting type with side-mounted buffer Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer. Double acting type with end keep Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Back side piping specification Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available. Back side piping specification with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Double acting type with stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with output side and input side stroke adjustments Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side and input side stroke adjustment buffers Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end. Double acting type with buffer and end keep Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Mini guide sliders MGA series Mini guide sliders MGA series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Unit Type Static electricity removal A3 size DTY-WC-L Ion Wiper combines a high-frequency AC ionizer with an air curtain to maintain workplace cleanliness, while providing efficient charge removal, dust removal, and dust collection, all within a single unit box. Next SIMILAR PRODUCTS Static electricity removal Unit Type Ion wiper's charge removal and dust removal functions and dust collection function split into modules. Charge removal, dust removal, and dust collection units can flexibly handle various needs and a wide range of workpiece sizes. Separate Type DTY-WB Separate Type DTY-WB Ion Wiper combines a high-frequency AC ionizer with an air curtain to maintain workplace cleanliness, while providing efficient charge removal, dust removal, and dust collection, all within a single unit box. A4 size DTY-WC-S A4 size DTY-WC-S Ion Wiper combines a high-frequency AC ionizer with an air curtain to maintain workplace cleanliness, while providing efficient charge removal, dust removal, and dust collection, all within a single unit box. A3 size DTY-WC-L A3 size DTY-WC-L RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Mist, Micromist filters Air Filters / Regulators MFZ Oil Mist Filters NPT Thread FRZ series (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. Next SIMILAR PRODUCTS Air Filters / Regulators Mist, Micromist filters Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles. Micro Mist Filter KMF Micro Mist Filter KMF Large FRL Series mist filter. 0.3 μm element removes dirt and oil. Cartridge type element simplifies maintenance. Large FRL series Mist Filters MF800-1000 Large FRL series Mist Filters MF800-1000 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance. Multi series Mist Filters MF300-600 Multi series Mist Filters MF300-600 (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters RC Thread FRZ series MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters RC Thread FRZ series MFZ Oil Mist Filters RC Thread FRZ series Large FRL Series micro mist filter. 0.01 μm element removes fine dirt and oil particles. Cartridge type element simplifies maintenance. Large FRL series Micro Mist Filters MMF600-800 Large FRL series Micro Mist Filters MMF600-800 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance. Multi series Micro Mist Micro Filters MMF150-400 Multi series Micro Mist Micro Filters MMF150-400 (NPT thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters NPT Thread FRZ series MMFZ Micro Oil Mist Filters NPT Thread FRZ series (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters NPT Thread FRZ series MFZ Oil Mist Filters NPT Thread FRZ series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Standard type Cylinder Slim Cylinder DA Series Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations. Next SIMILAR PRODUCTS Cylinder Standard type Φ 20 to 40 mm [0.787 to 1.575 in] cylinder bore. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. DV - Valpack Double Acting Type Slim Cylinder DV - Valpack Double Acting Type Slim Cylinder BDAV Series Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs. Vacuum Pad with Multi mount Cylinders Vacuum Pad with Multi mount Cylinders Double acting type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong double acting type cylinder that meets JIS standards. Double rod type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. Double acting type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Double acting type, steel tube specification. Double rod type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Steel tubing Φ180 to 250 mm [7.087 to 9.843 in] cylinder bore. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. KSD Cylinder KSD Cylinder TDA6 Single acting push out type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring. Double acting long bushing type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. End keep double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Twin Rod TDA6 Series Twin Rod TDA6 Series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs. Multi Mount Cylinders BDA series Multi Mount Cylinders BDA series Knock cylinders NDA series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with integrated return spring. Integrated spanner flats enable secure mounting. Knock Cylinders NDA series Knock Cylinders NDA series Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms. Pen Cylinder PBDA Series Pen Cylinder PBDA Series TBDA - Double acting type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin Rod TBDA (Standard type) Twin Rod TBDA (Standard type) Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design. Twist Cylinder RHDA Series Twist Cylinder RHDA Series DDA - Double acting type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. Double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Non-rotating double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. Non-rotating double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. Double acting pull stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Valpack double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DYNA Cylinders DYNA Cylinders Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. High Multi Cylinders YMDA series High Multi Cylinders YMDA series Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini Bit Cylinders MBDA series Mini Bit Cylinders MBDA series Jig cylinder CDA series ● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations. Jig cylinder C series stroke adjustment type ● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear. Jig cylinder C series low-friction cylinders ● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving. Jig Cylinder CDA Double Acting Type Jig Cylinder CDA Double Acting Type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations. Slim Cylinder DA Series Slim Cylinder DA Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Mist, Micromist filters Air Filters / Regulators Micro Mist Filter KMF Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles. Next SIMILAR PRODUCTS Air Filters / Regulators Mist, Micromist filters Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles. Micro Mist Filter KMF Micro Mist Filter KMF Large FRL Series mist filter. 0.3 μm element removes dirt and oil. Cartridge type element simplifies maintenance. Large FRL series Mist Filters MF800-1000 Large FRL series Mist Filters MF800-1000 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance. Multi series Mist Filters MF300-600 Multi series Mist Filters MF300-600 (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters RC Thread FRZ series MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters RC Thread FRZ series MFZ Oil Mist Filters RC Thread FRZ series Large FRL Series micro mist filter. 0.01 μm element removes fine dirt and oil particles. Cartridge type element simplifies maintenance. Large FRL series Micro Mist Filters MMF600-800 Large FRL series Micro Mist Filters MMF600-800 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance. Multi series Micro Mist Micro Filters MMF150-400 Multi series Micro Mist Micro Filters MMF150-400 (NPT thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters NPT Thread FRZ series MMFZ Micro Oil Mist Filters NPT Thread FRZ series (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters NPT Thread FRZ series MFZ Oil Mist Filters NPT Thread FRZ series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Air Filters Air Filters / Regulators Large FRL series Air Filter FN High capacity filter with a process flow rate of 3000 ?/min or 6000 ?/min. Next SIMILAR PRODUCTS Air Filters / Regulators Air Filters Compact, lightweight air filter. Quick fitting for simple tube connection to the device. Small FR series Air Filters FN100 Small FR series Air Filters FN100 Compact, lightweight vacuum filter. Quick fitting for simple tube connection to the device. Small FR series Vacuum Air Filters VFN100 Small FR series Vacuum Air Filters VFN100 5 μm element with little pressure loss. One-touch attachment and detachment, drain cock with fitting, or auto drain cock can be selected as options for the drain bowl. Multi series Air Filters F150-600 Multi series Air Filters F150-600 (Rc thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required. FNZ Air Filters RC Thread FRZ Series FNZ Air Filters RC Thread FRZ Series Compact type that offers outstanding silencing and less exhaust back pressure. Also inhibits invasion of foreign matter via the exhaust port. Oil removal from exhaust and lower noise. Clean operation promotes a clean environment. Exhaust filters EF Exhaust filters EF High capacity filter with a process flow rate of 3000 ?/min or 6000 ?/min. Large FRL series Air Filter FN Large FRL series Air Filter FN (NPT thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required. FNZ Air Filters NPT Thread FRZ Series FNZ Air Filters NPT Thread FRZ Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue CDAL_6_8_10 - Non-rotating double acting type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. Next SIMILAR PRODUCTS Consolidates electrical signals from the end of devices and enables communication with higher-level systems I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Clean System equipment Cylinder Clean room mini guide slider CS-MGA series (Clean system cylinder) Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Next SIMILAR PRODUCTS Cylinder Clean System equipment Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Clean room mini guide slider CS-MGA series (Clean system cylinder) Clean room mini guide slider CS-MGA series (Clean system cylinder) Rack-and-pinion type clean room specification rotary actuator. Piston type RAP (clean equipment) Piston type RAP (clean equipment) Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation. Flat rodless MRV (clean equipment) Flat rodless MRV (clean equipment) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Jig cylinder with guides (clean equipment Jig cylinder with guides (clean equipment Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Jig cylinder low-friction specification CDAZ (clean equipment) Jig cylinder low-friction specification CDAZ (clean equipment) Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option. Basic cylinders: With guide BCG (clean equipment) Basic cylinders: With guide BCG (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Multi mount cylinders (clean equipment) Multi mount cylinders (clean equipment) Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini bit cylinder MBDA (clean equipment) Mini bit cylinder MBDA (clean equipment) Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin rod cylinder TBDA (clean equipment) Twin rod cylinder TBDA (clean equipment) Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification. Parallel type NHBDPG (clean equipment) with linear guide Parallel type NHBDPG (clean equipment) with linear guide Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder. Twin rod cylinder TDA (clean equipment) Twin rod cylinder TDA (clean equipment) Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep. Slim cylinders (clean equipment) Slim cylinders (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Jig cylinder C series (clean equipment) Jig cylinder C series (clean equipment) Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. Double acting type basic cylinders BC (clean equipment) Double acting type basic cylinders BC (clean equipment) Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pen cylinder PBDA (clean equipment) Pen cylinder PBDA (clean equipment) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Regulators Air Filters / Regulators Stainless steel Regulator RS Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines. Next SIMILAR PRODUCTS Air Filters / Regulators Regulators RN100-111 RDN100-111 Compact, lightweight regulator. Quick fitting for simple tube connection to the device. Small FR series Regulators RN100-111 Small FR series Regulators RN100-111 Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life. Electro Pneumatic Transducing Regulator ETR Electro Pneumatic Transducing Regulator ETR Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines. Stainless steel Regulator RS Stainless steel Regulator RS Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification. Multi series Regulators R150-602 Multi series Regulators R150-602 (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator RC Thread Mpa Gauge RZ Regulator RC Thread Mpa Gauge Compact design with convenient built-in quick fitting. With pressure gauge for simple pressure checks. Regulator with quick fitting RTS Regulator with quick fitting RTS Instant response, even when there change in the secondary side pressure is great. Uses an air pilot system. High-relief Regulators HR High-relief Regulators HR Large FRL Series regulator. Large FRL series Regulators RN650-902 Large FRL series Regulators RN650-902 (NPT thread , psi Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator NPT Thread Psi Gauge RZ Regulator NPT Thread Psi Gauge New Regulators with Quick Fittings are available! RTLP Regulators with Quick Fittings Push Lock type RTLP Regulators with Quick Fittings Push Lock type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Standard type Cylinder Jig Cylinder CDA Double Acting Type Jig cylinder CDA series ● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations. Jig cylinder C series stroke adjustment type ● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear. Jig cylinder C series low-friction cylinders ● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving. Next SIMILAR PRODUCTS Cylinder Standard type Φ 20 to 40 mm [0.787 to 1.575 in] cylinder bore. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. DV - Valpack Double Acting Type Slim Cylinder DV - Valpack Double Acting Type Slim Cylinder BDAV Series Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs. Vacuum Pad with Multi mount Cylinders Vacuum Pad with Multi mount Cylinders Double acting type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong double acting type cylinder that meets JIS standards. Double rod type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. Double acting type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Double acting type, steel tube specification. Double rod type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Steel tubing Φ180 to 250 mm [7.087 to 9.843 in] cylinder bore. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. KSD Cylinder KSD Cylinder TDA6 Single acting push out type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring. Double acting long bushing type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. End keep double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Twin Rod TDA6 Series Twin Rod TDA6 Series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs. Multi Mount Cylinders BDA series Multi Mount Cylinders BDA series Knock cylinders NDA series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with integrated return spring. Integrated spanner flats enable secure mounting. Knock Cylinders NDA series Knock Cylinders NDA series Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms. Pen Cylinder PBDA Series Pen Cylinder PBDA Series TBDA - Double acting type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin Rod TBDA (Standard type) Twin Rod TBDA (Standard type) Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design. Twist Cylinder RHDA Series Twist Cylinder RHDA Series DDA - Double acting type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. Double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Non-rotating double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. Non-rotating double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. Double acting pull stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Valpack double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DYNA Cylinders DYNA Cylinders Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. High Multi Cylinders YMDA series High Multi Cylinders YMDA series Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini Bit Cylinders MBDA series Mini Bit Cylinders MBDA series Jig cylinder CDA series ● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations. Jig cylinder C series stroke adjustment type ● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear. Jig cylinder C series low-friction cylinders ● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving. Jig Cylinder CDA Double Acting Type Jig Cylinder CDA Double Acting Type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations. Slim Cylinder DA Series Slim Cylinder DA Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Combination Air Filters / Regulators Large FRL series Combinations CN A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Next SIMILAR PRODUCTS Air Filters / Regulators Combination A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Large FRL series Combinations CN Large FRL series Combinations CN FRL_C A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Multi series Combinations FRL C150-600 Multi series Combinations FRL C150-600 iB-Cyclone+FRZ Series combination that completely eliminates the drain. The perfect choice to reduce your number of assemblies and space requirements CMZ Series CMZ Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Precision Regulators Air Filters / Regulators Precision Regulator PR100 Compact precision regulator with extremely fine pressure settings at a sensitivity of 0.001 MPa. Next SIMILAR PRODUCTS Air Filters / Regulators Precision Regulators Allows highly accurate (0.001 MPa [0.145 psi] sensitivity) pressure settings for solvents used in liquid crystal and semiconductor processes and carrier gas in a pure water circuit, blow pressure, clean air pressure, and gas pressure. Precision stainless steel Regulator PRS Precision stainless steel Regulator PRS Compact precision regulator with extremely fine pressure settings at a sensitivity of 0.001 MPa. Precision Regulator PR100 Precision Regulator PR100 Single diaphragm type for high accuracy pressure adjustment in a compact configuration. Precision Regulator PR200 Precision Regulator PR200 RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Pulse blow unit, Air gun Speed controller, fittings, tubes, etc. Static electricity removal Pulse blow Unit PAUS Series (Secondary side mounting type) View PDF catalogue for more info. Next SIMILAR PRODUCTS Speed controller, fittings, tubes, etc. Static electricity removal Pulse blow unit, Air gun View PDF catalogue for more info. Pulse blow Unit PAUS Series (Secondary side mounting type) Pulse blow Unit PAUS Series (Secondary side mounting type) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

KOGANEI offers precision solutions for medical devices, including genetic analyzers, immunoassay analyzers, clinical sterilization equipment, and respiratory equipment. Key products like the G010 Series solenoid valves, 005 Series micro solenoid manifolds, FDH Series dryers, and PVR Series valves enhance performance, reduce leaks, and ensure efficient fluid control, supporting applications in deep vein thrombosis, anesthesia delivery, O2 concentrators, and more. Medical & Life Science Industry Download our guide KOGANEI supports a wide range of medical devices, including deep vein thrombosis devices, alternating pressure mattresses, O2 concentrators, negative wound therapy systems, root canal devices, anesthesia delivery systems, clinical sterilizers, endoscopy equipment, O2 conservers, ventilators, cataract surgery equipment, blood pressure monitors, lasik surgery devices, microdermabrasion systems, cardiovascular assist devices, capnography monitors, CO2 insufflators, dialysis machines, and chrysotherapy therapy devices, enhancing their functionality, reliability, and portability. For genetic analyzers, KOGANEI's G010 Series low-leak solenoid valves ensure consistent pressure control without any leakage, preventing pressure loss throughout the device’s lifecycle. In cell secretion analyzers, the 005 Series micro solenoid valve manifold controls over 150 flow paths in a compact design, reducing leaks and assembly errors while ensuring fast, accurate installation. Immunoassay analyzers benefit from MBDA Series actuators and 005 Series valves, providing a simple and reliable solution to minimize leaks and simplify installation. In clinical sterilization equipment, the FDH Series membrane dryer helps maintain a precise level of clean, dry compressed air, ensuring efficient and effective filtration. For endodontic devices, the PVR Series media isolation valve is modified to meet OEM requirements, providing a quiet, high-flow solution for fluid control with reduced operating noise. In respiratory equipment, the 005 Series high-flow, low-leak micro 3-way valve is ideal for mounting on a PCB, enabling quick calibration with minimal leakage, enhancing the system’s efficiency. Click here to get started now!

Previous View PDF Catalogue Cylinder TDA - Twin rod cylinder TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Next SIMILAR PRODUCTS Consolidates electrical signals from the end of devices and enables communication with higher-level systems I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Air Hands Cylinder Parallel type NHBDPGY with linear guide Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Next SIMILAR PRODUCTS Cylinder Air Hands A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Air Picker Gripper Air Picker Gripper Big type with a hollow body inside a rubber cylinder that expands into a donut shape to grip and hold the inner diameter of the workpiece over a wide area. Pick type RBP Pick type RBP Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Wide type air hand WHDP Wide type air hand WHDP Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape. 180 Degree Open/Close Type NHBDSLG 180 Degree Open/Close Type NHBDSLG Air drive double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. Mechanical drive normally close single acting type Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. 3 finger hand with linear guide NHE Series 3 finger hand with linear guide NHE Series Double acting synchronous type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Rack-and-pinion mechanism enables synced left and right lever operation. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. Double acting Synchronous type (long type) Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Synchronous long stroke type. Linear guide for high rigidity and a thin body design that is perfect for a wide range of workpiece gripping. Double acting asynchronous type Φ8 to 12 mm [0.315 to 0.472 in] cylinder bore. Levers are individually driven by different bore size cylinders, and the lever with the stronger gripping force becomes the gripping fixed point. Linear guide for high rigidity and thin body design. Flat type air hand AFDPG with linear guide Flat type air hand AFDPG with linear guide Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDP Parallel type NHBDP Single acting normally closed Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Parallel type. Single acting normally open Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Two types: parallel type and parallel type linear guide specification. Parallel type NHBMP mechanical hands Parallel type NHBMP mechanical hands Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGY with linear guide Parallel type NHBDPGY with linear guide Double acting type Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPG with linear guide Parallel type NHBDPG with linear guide A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Grip type RBG Grip type RBG Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping. Mechanical drive hand with linear guide NHBM Mechanical drive hand with linear guide NHBM Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models. L hand with linear guide NHL1D L hand with linear guide NHL1D Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling. 180 Degree Open/Close type NHBDSL 180 Degree Open/Close type NHBDSL Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models. Parallel type NHC1 series Parallel type NHC1 series Double acting type Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Swing type NHBDS Swing type NHBDS Double acting type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDPA with cross roller bearing Parallel type NHBDPA with cross roller bearing Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGJ with linear guide Parallel type NHBDPGJ with linear guide Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGL with linear guide Parallel type NHBDPGL with linear guide RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Regulators Air Filters / Regulators Electro Pneumatic Transducing Regulator ETR Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life. Next SIMILAR PRODUCTS Air Filters / Regulators Regulators RN100-111 RDN100-111 Compact, lightweight regulator. Quick fitting for simple tube connection to the device. Small FR series Regulators RN100-111 Small FR series Regulators RN100-111 Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life. Electro Pneumatic Transducing Regulator ETR Electro Pneumatic Transducing Regulator ETR Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines. Stainless steel Regulator RS Stainless steel Regulator RS Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification. Multi series Regulators R150-602 Multi series Regulators R150-602 (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator RC Thread Mpa Gauge RZ Regulator RC Thread Mpa Gauge Compact design with convenient built-in quick fitting. With pressure gauge for simple pressure checks. Regulator with quick fitting RTS Regulator with quick fitting RTS Instant response, even when there change in the secondary side pressure is great. Uses an air pilot system. High-relief Regulators HR High-relief Regulators HR Large FRL Series regulator. Large FRL series Regulators RN650-902 Large FRL series Regulators RN650-902 (NPT thread , psi Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator NPT Thread Psi Gauge RZ Regulator NPT Thread Psi Gauge New Regulators with Quick Fittings are available! RTLP Regulators with Quick Fittings Push Lock type RTLP Regulators with Quick Fittings Push Lock type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Regulators Air Filters / Regulators Large FRL series Regulators RN650-902 Large FRL Series regulator. Next SIMILAR PRODUCTS Air Filters / Regulators Regulators RN100-111 RDN100-111 Compact, lightweight regulator. Quick fitting for simple tube connection to the device. Small FR series Regulators RN100-111 Small FR series Regulators RN100-111 Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life. Electro Pneumatic Transducing Regulator ETR Electro Pneumatic Transducing Regulator ETR Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines. Stainless steel Regulator RS Stainless steel Regulator RS Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification. Multi series Regulators R150-602 Multi series Regulators R150-602 (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator RC Thread Mpa Gauge RZ Regulator RC Thread Mpa Gauge Compact design with convenient built-in quick fitting. With pressure gauge for simple pressure checks. Regulator with quick fitting RTS Regulator with quick fitting RTS Instant response, even when there change in the secondary side pressure is great. Uses an air pilot system. High-relief Regulators HR High-relief Regulators HR Large FRL Series regulator. Large FRL series Regulators RN650-902 Large FRL series Regulators RN650-902 (NPT thread , psi Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator NPT Thread Psi Gauge RZ Regulator NPT Thread Psi Gauge New Regulators with Quick Fittings are available! RTLP Regulators with Quick Fittings Push Lock type RTLP Regulators with Quick Fittings Push Lock type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Mist, Micromist filters Air Filters / Regulators MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. Next SIMILAR PRODUCTS Air Filters / Regulators Mist, Micromist filters Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles. Micro Mist Filter KMF Micro Mist Filter KMF Large FRL Series mist filter. 0.3 μm element removes dirt and oil. Cartridge type element simplifies maintenance. Large FRL series Mist Filters MF800-1000 Large FRL series Mist Filters MF800-1000 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance. Multi series Mist Filters MF300-600 Multi series Mist Filters MF300-600 (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters RC Thread FRZ series MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters RC Thread FRZ series MFZ Oil Mist Filters RC Thread FRZ series Large FRL Series micro mist filter. 0.01 μm element removes fine dirt and oil particles. Cartridge type element simplifies maintenance. Large FRL series Micro Mist Filters MMF600-800 Large FRL series Micro Mist Filters MMF600-800 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance. Multi series Micro Mist Micro Filters MMF150-400 Multi series Micro Mist Micro Filters MMF150-400 (NPT thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters NPT Thread FRZ series MMFZ Micro Oil Mist Filters NPT Thread FRZ series (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters NPT Thread FRZ series MFZ Oil Mist Filters NPT Thread FRZ series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.