top of page
Cover Countries
With guides
Cylinder
Mini guide sliders MGA series
Double acting type
Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom.
Side mounted double acting type
Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping.
Double acting type with side-mounted buffer
Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer.
Double acting type with end keep
Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.
Back side piping specification
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available.
Back side piping specification with buffer
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.
Double acting type with stroke adjustment buffer
Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
Double acting type with output side stroke adjustment buffer
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
Double acting type with output side and input side stroke adjustments
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup.
Double acting type with output side and input side stroke adjustment buffers
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end.
Double acting type with buffer
Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end.
Double acting type with buffer and end keep
Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.
Cylinder
With guides
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
Double acting bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less.
Double acting bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less.
Double acting long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less.
Double acting double rod bushing type.
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less.
Double acting double rod bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less.
Double acting double rod long bearing type
Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.
Axis cylinder XDA series
RoHS-compliance
Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006.
On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances.
Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.
bottom of page