Double acting bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less. Double acting bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less. Double acting long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less. Double acting double rod bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less. Double acting double rod bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less. Double acting double rod long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less.

Double acting type with guides Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output. ​Shock absorber type with guides Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. A shock absorber at the stroke end absorbs end impact force and allows stroke adjustment. ​End keep type with guides Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

Cylinder sensor compatible type with guides Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Linear guide equipped in a square body provides space savings and non-rotating accuracy.

Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Thin actuator with linear guide. Twin rod for high output.

Double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of standard jig cylinders with guides. Easy to use, saves space. ​Stroke adjustment double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of stroke adjustment type standard jig cylinders with guides. ​Double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions. Stroke adjustment double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. With adjuster mechanism that can be used to limit the output side stroke. Jig cylinder with guide that is now even easier to use. ​End keep double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

Double acting type Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom. Side mounted double acting type Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping. ​ Double acting type with side-mounted buffer Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer. Double acting type with end keep Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Back side piping specification Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available. Back side piping specification with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Double acting type with stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with output side and input side stroke adjustments Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side and input side stroke adjustment buffers Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end. Double acting type with buffer and end keep Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end.