Search Results

Previous View PDF Catalogue Air Hands Cylinder Parallel type NHBDPGY with linear guide Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Next Cylinder Air Hands A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Air Picker Gripper Air Picker Gripper Big type with a hollow body inside a rubber cylinder that expands into a donut shape to grip and hold the inner diameter of the workpiece over a wide area. Pick type RBP Pick type RBP Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Wide type air hand WHDP Wide type air hand WHDP Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape. 180 Degree Open/Close Type NHBDSLG 180 Degree Open/Close Type NHBDSLG Air drive double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. Mechanical drive normally close single acting type Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. 3 finger hand with linear guide NHE Series 3 finger hand with linear guide NHE Series Double acting synchronous type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Rack-and-pinion mechanism enables synced left and right lever operation. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. Double acting Synchronous type (long type) Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Synchronous long stroke type. Linear guide for high rigidity and a thin body design that is perfect for a wide range of workpiece gripping. Double acting asynchronous type Φ8 to 12 mm [0.315 to 0.472 in] cylinder bore. Levers are individually driven by different bore size cylinders, and the lever with the stronger gripping force becomes the gripping fixed point. Linear guide for high rigidity and thin body design. Flat type air hand AFDPG with linear guide Flat type air hand AFDPG with linear guide Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDP Parallel type NHBDP Single acting normally closed Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Parallel type. Single acting normally open Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Two types: parallel type and parallel type linear guide specification. Parallel type NHBMP mechanical hands Parallel type NHBMP mechanical hands Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGY with linear guide Parallel type NHBDPGY with linear guide Double acting type Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPG with linear guide Parallel type NHBDPG with linear guide A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Grip type RBG Grip type RBG Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping. Mechanical drive hand with linear guide NHBM Mechanical drive hand with linear guide NHBM Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models. L hand with linear guide NHL1D L hand with linear guide NHL1D Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling. 180 Degree Open/Close type NHBDSL 180 Degree Open/Close type NHBDSL Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models. Parallel type NHC1 series Parallel type NHC1 series Double acting type Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Swing type NHBDS Swing type NHBDS Double acting type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDPA with cross roller bearing Parallel type NHBDPA with cross roller bearing Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGJ with linear guide Parallel type NHBDPGJ with linear guide Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGL with linear guide Parallel type NHBDPGL with linear guide RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Standard type Cylinder Twin Rod TBDA (Standard type) TBDA - Double acting type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Next Cylinder Standard type TBDA - Double acting type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin Rod TBDA (Standard type) Twin Rod TBDA (Standard type) Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. In a single action, the rod moves forward while simultaneously rotating 90 degrees. Slim body and one-location piping ports for a space saving design. Twist Cylinder RHDA Series Twist Cylinder RHDA Series DDA - Double acting type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. Double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Non-rotating double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. Non-rotating double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. Double acting pull stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. Valpack double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Integrated solenoid valve and cylinder for less wasted air consumption within piping and reduced piping work requirements. Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DYNA Cylinders DYNA Cylinders Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Square body and six-side mounting enable compact and direct mounting. High Multi Cylinders YMDA series High Multi Cylinders YMDA series Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini Bit Cylinders MBDA series Mini Bit Cylinders MBDA series Jig cylinder CDA series ● Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Short, thin body designed for total space saving. Extensive lineup includes a total of 15 variations. Jig cylinder C series stroke adjustment type ● Φ12 to 40 mm [0.472 to 1.575 in] cylinder bore size. The world's first stroke adjustment cylinder, the push side stroke can be adjusted by rotating the adjuster gear. Jig cylinder C series low-friction cylinders ● Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. A low friction cylinder with a short, thin body designed for total space saving. Jig Cylinder CDA Double Acting Type Jig Cylinder CDA Double Acting Type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. Stainless steel tubing for high quality and high reliability that sets the standard for small and medium size cylinders. Extensive lineup includes a total of 21 variations. Slim Cylinder DA Series Slim Cylinder DA Series BDAV Series Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Integration of a vacuum pad and cylinder into a single unit and a hollow shaft structure enables a very small overall length and small operation that fully meets a variety of vacuum system suction and handling, and other needs. Vacuum Pad with Multi mount Cylinders Vacuum Pad with Multi mount Cylinders Double acting type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong double acting type cylinder that meets JIS standards. Double rod type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Aluminum tubing Φ125 to 160 mm [4.921 to 6.299 in] cylinder bore size. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. Double acting type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Double acting type, steel tube specification. Double rod type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with piston rods on both ends of the piston. Multi position: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be linked in series and three stop positions can be specified. Dual stroke type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Two cylinders can be combined back-to-back for two operation strokes. Push stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Pull stroke adjustment type: Steel tubing Φ125 to 250 mm [4.921 to 9.843 in] cylinder bore size. Strong cylinder that meets JIS standards. Cylinder with stroke limiting stopper. Low hydraulic pressure: Steel tubing Φ180 to 250 mm [7.087 to 9.843 in] cylinder bore. Strong cylinder that meets JIS standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. KSD Cylinder KSD Cylinder TDA6 Single acting push out type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Single acting type with integrated return spring. Double acting long bushing type Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Original rotation-less cylinder that integrates two cylinders into a compact configuration. End keep double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Twin Rod TDA6 Series Twin Rod TDA6 Series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Non-rotating type meets a wide variety of high non-rotating accuracy needs. Multi Mount Cylinders BDA series Multi Mount Cylinders BDA series Knock cylinders NDA series Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Short body and versatile mounting creates a simpler mechanical device. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Single acting type with integrated return spring. Integrated spanner flats enable secure mounting. Knock Cylinders NDA series Knock Cylinders NDA series Φ2.5 to 16 mm [0.098 to 0.630 in] cylinder bore. Complies with all model non-ion standards. A total of 17 variations, from single and double acting types, to types with stroke adjustment mechanisms. Pen Cylinder PBDA Series Pen Cylinder PBDA Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue DDAL - Non-rotating double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. Next Cylinder TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Filter Regulators Air Filters / Regulators FRZ series RC Thread Mpa Gauge New-generation filter regulator. Perfect on lines following the removal of moisture and fluids. Elimination of fluid removal function for greater mounting direction freedom. Easy bowl attachment and detachment. Next Air Filters / Regulators Filter Regulators Compact, lightweight filter regulator. Quick fitting for simple tube connection to the device. Small FR series Filter regulators FRN Small FR series Filter regulators FRN F.R.L 5 μm air filter and regulator incorporated into a compact configuration. Preset marker pressure gauge equipped as standard. Drain cock with fitting or auto drain cock can be selected. Multi series Filter regulators FR Multi series Filter regulators FR (Rc thread , Mpa Gauge) Filter regulator with simple moisture and fluid removal functions in a compact design. Improved flow volume characteristics allow a more compact configuration. Improved bowl attachment and detachment work. FRZB series RC Thread Mpa Gauge FRZB series RC Thread Mpa Gauge In-line Filters that protect against pneumatic equipment trouble, keep air clean In-Line Filter In-Line Filter Next generation of filter regulator. Ideal for use on pneumatic lines downstream of other moisture and fluid removal units. Elimination of drain function provides greater mounting flexibility. Simple bowl attachment design enables easy removal for filter element replacement. The Selection Guide provides a summary of the 7 different Filter Regulators. The FRZ30 / FRZ40 / FRZ50 Series variations include: High Flow in a Compact Body Size Short Filter Bowl (w/o Drain) Is Ideal for Tight Envelopes Tamper Resistant with Removable Adjustment Knob Complete Air Prep Assembly Capability with Sizes 40 and 50 Pressure Setting Range Window Makes It Easy Ensure Correct Setting RoHS Compliance Operations Filter Regulator Low Pressure Filter Regulator Filter Regulator with Reverse Flow Check FRZ series NPT Thread Psi Gauge FRZ series NPT Thread Psi Gauge Combination air filter, regulator, and lubricator for high flow rate. Large FRL series Filter regulator CY CZ Large FRL series Filter regulator CY CZ (NPT thread , psi Gauge) Filter regulator with simple moisture and fluid removal functions in a compact design. Improved flow volume characteristics allow a more compact configuration. Improved bowl attachment and detachment work. FRZB series NPT Thread Psi Gauge FRZB series NPT Thread Psi Gauge A new countermeasure against condensation in compact cylinders, etc.! Simply insert into piping for an easy condensation countermeasure. Water removal valves MTV series Water removal valves MTV series New-generation filter regulator. Perfect on lines following the removal of moisture and fluids. Elimination of fluid removal function for greater mounting direction freedom. Easy bowl attachment and detachment. FRZ series RC Thread Mpa Gauge FRZ series RC Thread Mpa Gauge RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Transport type Cylinder Slit Type MRB Rodless Cylinder with Integrated Guide Standard specifications Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Next Cylinder Transport type Double acting type with double guide Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Double acting type with integrated guide Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Slide Table B Type AGT series Slide Table B Type AGT series Standard specifications Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Slit Type MRB Rodless Cylinder with Integrated Guide Slit Type MRB Rodless Cylinder with Integrated Guide Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity magnet type with two linear guides. Shock absorber unit equipped as standard. Magnet type MRW Rodless cylinder with linear guide Magnet type MRW Rodless cylinder with linear guide Magnet type with guide MRG Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRG Flat Rodless cylinder Magnet type MRG Flat Rodless cylinder Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Unique oval barrel design enables low speed performance impossible before now. Magnet type MRV Flat Rodless cylinder Magnet type MRV Flat Rodless cylinder Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Slit type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Slit type ORS Rodless cylinder with linear guide Slit type ORS Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Smooth operation of the rolling bearing of the cam follower guide. Wide rail maintains high accuracy over the long term. Slit type ORK Rodless with cam follower guide Slit type ORK Rodless with cam follower guide Φ63 to 80 mm [2.480 to 3.150 in] cylinder bore. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC63, 80 Rodless cylinder Slit type ORC63, 80 Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Original flat piston mechanism set a new low cost, short, and thin standard for rodless pistons. Combination with the linear guide enables a low center of gravity and smooth operation. Slit type ORV Rodless cylinder Slit type ORV Rodless cylinder Fixed Table Type SUT Fixed End Plate Type SUP Fixed Rail-on Plate Type SUL Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Double acting type End keep type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Slide Unit SUT SUP SUL series Slide Unit SUT SUP SUL series Standard specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Slit Type ORB Rodless Cylinder with Integrated Guide Slit Type ORB Rodless Cylinder with Integrated Guide Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Magnet type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Magnet type MRS Rodless cylinder with linear guide Magnet type MRS Rodless cylinder with linear guide Magnet type MRC Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRC Flat Rodless cylinder Magnet type MRC Flat Rodless cylinder Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity slit type with two linear guides. Shock absorber unit equipped as standard. Slit type ORW Rodless cylinder with linear guide Slit type ORW Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORGA Rodless cylinder Slit type ORGA Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORCA Rodless cylinder Slit type ORCA Rodless cylinder Φ10 mm [0.394 in] cylinder bore size. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC10 Rodless cylinder Slit type ORC10 Rodless cylinder RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue DDAD - Double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. Next Cylinder TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Controller for KFPV Medium control equipment Controller KFPC for KFPV Initialization without external input. (With initial setting support circuit) Compatible with proportional control valves KFPV050, 300 Series. Page 8(13) Next Medium control equipment Controller for KFPV Initialization without external input. (With initial setting support circuit) Compatible with proportional control valves KFPV050, 300 Series. Page 8(13) Controller KFPC for KFPV Controller KFPC for KFPV RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Clean System equipment Cylinder Jig cylinder low-friction specification CDAZ (clean equipment) Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Next Cylinder Clean System equipment Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin rod cylinder TBDA (clean equipment) Twin rod cylinder TBDA (clean equipment) Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification. Parallel type NHBDPG (clean equipment) with linear guide Parallel type NHBDPG (clean equipment) with linear guide Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder. Twin rod cylinder TDA (clean equipment) Twin rod cylinder TDA (clean equipment) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Jig cylinder with guides (clean equipment Jig cylinder with guides (clean equipment Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Jig cylinder low-friction specification CDAZ (clean equipment) Jig cylinder low-friction specification CDAZ (clean equipment) Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option. Basic cylinders: With guide BCG (clean equipment) Basic cylinders: With guide BCG (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Multi mount cylinders (clean equipment) Multi mount cylinders (clean equipment) Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini bit cylinder MBDA (clean equipment) Mini bit cylinder MBDA (clean equipment) Rack-and-pinion type clean room specification rotary actuator. Piston type RAP (clean equipment) Piston type RAP (clean equipment) Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation. Flat rodless MRV (clean equipment) Flat rodless MRV (clean equipment) Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Mini guide slider MGA (clean equipment) Mini guide slider MGA (clean equipment) Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep. Slim cylinders (clean equipment) Slim cylinders (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Jig cylinder C series (clean equipment) Jig cylinder C series (clean equipment) Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. Double acting type basic cylinders BC (clean equipment) Double acting type basic cylinders BC (clean equipment) Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pen cylinder PBDA (clean equipment) Pen cylinder PBDA (clean equipment) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue DDA - Double acting type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. Next Cylinder TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration. TDA - Twin rod cylinder TDA - Twin rod cylinder Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified. DDAT - Double acting multi position type DDAT - Double acting multi position type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAP - Double acting push stroke adjustment type DDAP - Double acting push stroke adjustment type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. DDAK - End keep double acting type DDAK - End keep double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper. DDAE - Double acting pull stroke adjustment type DDAE - Double acting pull stroke adjustment type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston. DDAD - Double acting double rod type DDAD - Double acting double rod type Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. CCDAK - End keep double acting type CCDAK - End keep double acting type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CTAW - Dual stroke single acting pull type CTAW - Dual stroke single acting pull type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CSAW - Dual stroke type single acting push type CSAW - Dual stroke type single acting push type Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CSAD - Single acting double rod type CSAD - Single acting double rod type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving. CDAW - Dual stroke double acting pull type CDAW - Dual stroke double acting pull type Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving. CDAL_6_8_10 - Non-rotating double acting type CDAL_6_8_10 - Non-rotating double acting type Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving. CDAD - Double acting double rod type CDAD - Double acting double rod type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes. DDAW - Dual stroke double acting pull type DDAW - Dual stroke double acting pull type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position. DDAR - Double acting brake type DDAR - Double acting brake type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod. DDAL - Non-rotating double acting type DDAL - Non-rotating double acting type Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure. DDAH - Low hydraulic pressure: Double acting type DDAH - Low hydraulic pressure: Double acting type Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston. DDADL - Non-rotating double acting double rod type DDADL - Non-rotating double acting double rod type Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders. DDA - Double acting type DDA - Double acting type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving. CCDA - Double acting long stroke type CCDA - Double acting long stroke type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CTA - Single acting pull CTA - Single acting pull Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CSAT - Single acting multi position push out type CSAT - Single acting multi position push out type Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving. CSA - Single acting push out type CSA - Single acting push out type Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving. CDAT - Double acting multi position type CDAT - Double acting multi position type Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving. CDAL - Square rod double acting type CDAL - Square rod double acting type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Air Filters Air Filters / Regulators Large FRL series Air Filter FN High capacity filter with a process flow rate of 3000 ?/min or 6000 ?/min. Next Air Filters / Regulators Air Filters Compact, lightweight air filter. Quick fitting for simple tube connection to the device. Small FR series Air Filters FN100 Small FR series Air Filters FN100 Compact, lightweight vacuum filter. Quick fitting for simple tube connection to the device. Small FR series Vacuum Air Filters VFN100 Small FR series Vacuum Air Filters VFN100 5 μm element with little pressure loss. One-touch attachment and detachment, drain cock with fitting, or auto drain cock can be selected as options for the drain bowl. Multi series Air Filters F150-600 Multi series Air Filters F150-600 (Rc thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required. FNZ Air Filters RC Thread FRZ Series FNZ Air Filters RC Thread FRZ Series Compact type that offers outstanding silencing and less exhaust back pressure. Also inhibits invasion of foreign matter via the exhaust port. Oil removal from exhaust and lower noise. Clean operation promotes a clean environment. Exhaust filters EF Exhaust filters EF High capacity filter with a process flow rate of 3000 ?/min or 6000 ?/min. Large FRL series Air Filter FN Large FRL series Air Filter FN (NPT thread) A lineup for filtered particle sizes of 5 μm and 40 μm. The filter element condition can be inspected visually, making it easier to see when maintenance is required. FNZ Air Filters NPT Thread FRZ Series FNZ Air Filters NPT Thread FRZ Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Transport type Cylinder Slit type ORCA Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Next Cylinder Transport type Double acting type with double guide Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Double acting type with integrated guide Φ10 to 16 mm [0.394 to 0.630 in] cylinder bore size. Unit type small-size actuator that combines a cylinder and miniature guide for high Z-axis accuracy, high rigidity, and space saving. Slide Table B Type AGT series Slide Table B Type AGT series Standard specifications Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Guide mechanism built in! Lightweight, Compact, High-rigidity! Select from among our H1 grade food equipment specifications. Slit Type MRB Rodless Cylinder with Integrated Guide Slit Type MRB Rodless Cylinder with Integrated Guide Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity magnet type with two linear guides. Shock absorber unit equipped as standard. Magnet type MRW Rodless cylinder with linear guide Magnet type MRW Rodless cylinder with linear guide Magnet type with guide MRG Φ6 to 40 mm [0.236 to 1.575 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRG Flat Rodless cylinder Magnet type MRG Flat Rodless cylinder Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Unique oval barrel design enables low speed performance impossible before now. Magnet type MRV Flat Rodless cylinder Magnet type MRV Flat Rodless cylinder Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Slit type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Slit type ORS Rodless cylinder with linear guide Slit type ORS Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Smooth operation of the rolling bearing of the cam follower guide. Wide rail maintains high accuracy over the long term. Slit type ORK Rodless with cam follower guide Slit type ORK Rodless with cam follower guide Φ63 to 80 mm [2.480 to 3.150 in] cylinder bore. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC63, 80 Rodless cylinder Slit type ORC63, 80 Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Original flat piston mechanism set a new low cost, short, and thin standard for rodless pistons. Combination with the linear guide enables a low center of gravity and smooth operation. Slit type ORV Rodless cylinder Slit type ORV Rodless cylinder Fixed Table Type SUT Fixed End Plate Type SUP Fixed Rail-on Plate Type SUL Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Double acting type End keep type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Two cylinders are incorporated into the table for high non-rotating accuracy, positional accuracy, and space saving. Slide Unit SUT SUP SUL series Slide Unit SUT SUP SUL series Standard specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Food equipment H1grease specification Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Slit type rodless cylinder with built-in guide mechanism! Lightweight, Compact, High-rigidity! Contributes to device space saving. Slit Type ORB Rodless Cylinder with Integrated Guide Slit Type ORB Rodless Cylinder with Integrated Guide Φ10 to 40 mm [0.394 to 1.575 in] cylinder bore size. Magnet type with very low position table design, which allows a very thin device design. Shock absorber unit also equipped as standard. Magnet type MRS Rodless cylinder with linear guide Magnet type MRS Rodless cylinder with linear guide Magnet type MRC Φ6 to 32 mm [0.236 to 1.260 in] cylinder bore. Uses a world-class neodymium rare earth magnet for strong support. Covers the maximum stroke (2000 mm [79 in]) that can be manufactured. Magnet type MRC Flat Rodless cylinder Magnet type MRC Flat Rodless cylinder Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. High-rigidity slit type with two linear guides. Shock absorber unit equipped as standard. Slit type ORW Rodless cylinder with linear guide Slit type ORW Rodless cylinder with linear guide Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORGA Rodless cylinder Slit type ORGA Rodless cylinder Φ16 to 50 mm [0.630 to 1.969 in] cylinder bore. Slit type that requires half the mounting space and dramatically limits overall length and height. One-side surface piping support for port arrangement with plenty of directional versatility. Slit type ORCA Rodless cylinder Slit type ORCA Rodless cylinder Φ10 mm [0.394 in] cylinder bore size. Long stroke and high-speed operation in half the mounting space. Slit type that does not require a baffle or guide. Slit type ORC10 Rodless cylinder Slit type ORC10 Rodless cylinder RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Fan Type Static electricity removal IonIzier Fan Type High Performance Type DTY-ELF13H,14H High-performance types have excellent long-term stability Next Static electricity removal Fan Type Overhead fan type ionizer for which air supply is not required. Can eliminate static charge over an extensive range. HA Series Over head type HA Series Over head type No air supply required, which enables installation location and application versatility. High-speed charge removal for a wide range of work pieces. CE marking compliant. ELW Series Wide Type ELW Series Wide Type High-performance types have excellent long-term stability IonIzier Fan Type High Performance Type DTY-ELF13H,14H IonIzier Fan Type High Performance Type DTY-ELF13H,14H New Series of Fan Type Ionizers! Integrated compact, high-voltage transformer allows use of a low-voltage DC power supply. DTY-ELF14HC. DTY-ELF13H,14H, DTY-ELF13,14 ELF Series (New) ELF Series (New) Can eliminate static charge over an extensive range. Air supply is not required, and two types can be chosen depending on the installation location and application. FA Series Wide area type FA Series Wide area type Excellent ion balance with self-cleaning function Ionizer Fan Type Multi Function Type DTY-ELF14HC Ionizer Fan Type Multi Function Type DTY-ELF14HC Basic Fan Type Ionizer Fan Type Simple Type DTY-ELF13,14 Ionizer Fan Type Simple Type DTY-ELF13,14 RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Handling products for Robots Cylinder Electric Auto Hand Changer EMJ Series Energy saving Once connected, electric current is not required. Easy control Controllable with ON / OFF control. Slim design No interference with peripheral devices. High precision Repeatability is ±0.003 mm [0.0001 in.] Size Variation Maximum payloads at 3 kg [6.615 lb], 10 kg [22.050 lb], 30 kg [66.150 lb] Next Cylinder Handling products for Robots The swing type corrects positional errors when inserting workpieces and press fitting, and when handling workpieces in the X, Y, Z, θ, and α axes. Compliance light swing type CPL_S Compliance light swing type CPL_S Specialized robot joint for EPSON Robot! Robot Joint EPSON Robot Compatible KRJ EPS Robot Joint EPSON Robot Compatible KRJ EPS Energy saving Once connected, electric current is not required. Easy control Controllable with ON / OFF control. Slim design No interference with peripheral devices. High precision Repeatability is ±0.003 mm [0.0001 in.] Size Variation Maximum payloads at 3 kg [6.615 lb], 10 kg [22.050 lb], 30 kg [66.150 lb] Electric Auto Hand Changer EMJ Series Electric Auto Hand Changer EMJ Series Compliance light parallel type Compliance light swing type The parallel type corrects positional errors when inserting workpieces and press fitting, and when handling workpieces in the X, Y, and θ axes. Compliance light parallel type Compliance light parallel type Specialized robot joint for IAI Robot! Robot Joint IAI Robot Compatible Robot Joint IAI Robot Compatible Lightest in the world. Ideal for tool change of robot tip. D-sub and various connectors can be selected. Auto Hand Changer MJC series Auto Hand Changer MJC series Absorbs the position error of the X/Y axis. Compliance light 8-free (parallel type) Compliance light 8-free (parallel type) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Clean System equipment Cylinder Jig cylinder C series (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Next Cylinder Clean System equipment Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin rod cylinder TBDA (clean equipment) Twin rod cylinder TBDA (clean equipment) Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification. Parallel type NHBDPG (clean equipment) with linear guide Parallel type NHBDPG (clean equipment) with linear guide Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder. Twin rod cylinder TDA (clean equipment) Twin rod cylinder TDA (clean equipment) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Jig cylinder with guides (clean equipment Jig cylinder with guides (clean equipment Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Jig cylinder low-friction specification CDAZ (clean equipment) Jig cylinder low-friction specification CDAZ (clean equipment) Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option. Basic cylinders: With guide BCG (clean equipment) Basic cylinders: With guide BCG (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Multi mount cylinders (clean equipment) Multi mount cylinders (clean equipment) Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini bit cylinder MBDA (clean equipment) Mini bit cylinder MBDA (clean equipment) Rack-and-pinion type clean room specification rotary actuator. Piston type RAP (clean equipment) Piston type RAP (clean equipment) Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation. Flat rodless MRV (clean equipment) Flat rodless MRV (clean equipment) Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Mini guide slider MGA (clean equipment) Mini guide slider MGA (clean equipment) Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep. Slim cylinders (clean equipment) Slim cylinders (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Jig cylinder C series (clean equipment) Jig cylinder C series (clean equipment) Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. Double acting type basic cylinders BC (clean equipment) Double acting type basic cylinders BC (clean equipment) Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pen cylinder PBDA (clean equipment) Pen cylinder PBDA (clean equipment) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Mist, Micromist filters Air Filters / Regulators MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. Next Air Filters / Regulators Mist, Micromist filters Removal of solids 0.01 μm and greater, and residual oil up to 0.01 wt ppm. Installation at an inlet port where oil must not enter or somewhere past the air dryer removes oil and fine particles. Micro Mist Filter KMF Micro Mist Filter KMF Large FRL Series mist filter. 0.3 μm element removes dirt and oil. Cartridge type element simplifies maintenance. Large FRL series Mist Filters MF800-1000 Large FRL series Mist Filters MF800-1000 0.3 μm element removes dirt and oil. Bowl is one-touch attachable and detachable, and cartridge type element simplifies maintenance. Multi series Mist Filters MF300-600 Multi series Mist Filters MF300-600 (Rc thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters RC Thread FRZ series MMFZ Micro Oil Mist Filters RC Thread FRZ series (Rc thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters RC Thread FRZ series MFZ Oil Mist Filters RC Thread FRZ series Large FRL Series micro mist filter. 0.01 μm element removes fine dirt and oil particles. Cartridge type element simplifies maintenance. Large FRL series Micro Mist Filters MMF600-800 Large FRL series Micro Mist Filters MMF600-800 0.01 μm element removes fine dirt and oil particles. Bowl is one-touch attachable and detachable. Cartridge type element simplifies maintenance. Multi series Micro Mist Micro Filters MMF150-400 Multi series Micro Mist Micro Filters MMF150-400 (NPT thread) 0.01 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MMFZ Micro Oil Mist Filters NPT Thread FRZ series MMFZ Micro Oil Mist Filters NPT Thread FRZ series (NPT thread) 0.3 μm rated filtration, improved flow rate characteristics enables a more compact design. The filter element condition can be inspected visually, making it easier to see when maintenance is required. MFZ Oil Mist Filters NPT Thread FRZ series MFZ Oil Mist Filters NPT Thread FRZ series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Solenoid Valve Internal Pilot Valve Solenoid valve 112 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Next Valve Solenoid Valve Internal Pilot Solenoid valve F10 Series for cylinder bore sizes of 20 to 50 mm [0.787 to 1.969 in]. 10 mm [0.394 in] valve width. World's first valve to be equipped with reducer size fitting. A wide range of manifold specifications to meet user needs. F10 Series F10 Series Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve. Solenoid valve 010E1 series Solenoid valve 010E1 series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication. Solenoid valve 300 series Solenoid valve 300 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 182 series Solenoid valve 182 series For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value. Solenoid valve JA series Solenoid valve JA series F10, F15, F18 Series. Low current type & single dual use valves offer energy saving and low price. 100+ million cycle life tested and rated directional control valve series that can switch direction of the cylinder ports and from double to single solenoid without any additional parts needed. The Selection Guide provides a summary of the 132 F Series – Indirect Acting Solenoid Valves. The F Series variations include: Direct Wiring, D-Sub, Flat Cable or Serial Communication Inline, Subbase, Mono Block and Split Type Manifold Switchable Output Ports Direct on Valve or Manifold Field Selectable Single or Double Solenoid Operation Available with Two 3-way Valves in One Body RoHS Compliance Solenoid Valve F Series Solenoid Valve F Series For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control. EA / EB Series EA / EB Series Perfect for operation control of small-size actuators with a double acting or single acting cylinder bore sizes of 6 to 20 mm [0.236 to 0.787 in]. 030 / H030 series 030 / H030 series Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single (two-position double solenoid specifications only). PA / PB Series PA / PB Series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. A wide variety of lead wire connections and stacking manifolds. Solenoid valve 240 series Solenoid valve 240 series A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 180 series Solenoid valve 180 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 112 series Solenoid valve 112 series A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 110 series Solenoid valve 110 series This product has received an order corresponding to for maintenance . Please contact your nearest sales office for more information . Solenoid valve 040 series Solenoid valve 040 series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Pressure Gauge Air Filters / Regulators Pressure gauge G1-40 Compact pressure gauge with external dimension of 40 mm [1.575 in]. With a mechanism that prevents the pressure gauge from falling from the case. Next Air Filters / Regulators Pressure Gauge Pressure gauge for compact FR Series. Pressure gauges for small FR series G1-18D Pressure gauges for small FR series G1-18D 40 mm [1.575 in] outside diameter vacuum pressure gauge. Panel mount can be selected which is convenient for incorporating into a device. Vacuum gauge GV-40 Vacuum gauge GV-40 Pressure gauge with external dimension of 40 mm [1.575 in]. Compact with panel mount, and a mechanism that prevents the pressure gauge from falling from the case. Standard pressure specification and low pressure specification available. Panel mount pressure gauge GP1-40 Panel mount pressure gauge GP1-40 Compact configuration while maintaining pressure indication precision full scale ±1%. Mechanical life of 200,000 cycles during FS operation. (Integrated throttle valve) Small precision pressure gauge G3P-40 Small precision pressure gauge G3P-40 Set pressure and working pressure displayed by a single pressure gauge. Panel mounting is also supported for easy centralized control and management from the control panel. GS1-50 pressure gauge with built-in switches (mechanical) GS1-50 pressure gauge with built-in switches (mechanical) Gas pressure gauge, standard pressure specification, and low pressure specification are available G1S G3S Pressure gauge for precision stainless steel regulator G1S G3S Pressure gauge for precision stainless steel regulator Compact pressure gauge with external dimension of 40 mm [1.575 in]. With a mechanism that prevents the pressure gauge from falling from the case. Pressure gauge G1-40 Pressure gauge G1-40 Compact pressure gauge with external dimension of 20 mm [0.787 in]. Small pressure gauge G1-20 Small pressure gauge G1-20 RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Manifold Regulators Air Filters / Regulators Small FR series Manifold Regulators RN100M Manifold regulator RN100M For single unit: MRN100-111 Compact, lightweight manifold regulator. Next Air Filters / Regulators Manifold Regulators MR050, MR502, MR100, MR102 Single location checking and adjustment of supply air to multiple lines. In addition to a new binary relief type, the flexibility to meet a variety of different needs. Manifold Regulators MR050-MR102 Manifold Regulators MR050-MR102 Manifold regulator RN100M For single unit: MRN100-111 Compact, lightweight manifold regulator. Small FR series Manifold Regulators RN100M Small FR series Manifold Regulators RN100M Single location checking and adjustment of supply air to multiple lines. The flexibility to meet a variety of different needs. Multi series Manifold Regulators R300M Multi series Manifold Regulators R300M RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Solenoid Valve Internal Pilot Valve PA / PB Series Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single (two-position double solenoid specifications only). Next Valve Solenoid Valve Internal Pilot Solenoid valve F10 Series for cylinder bore sizes of 20 to 50 mm [0.787 to 1.969 in]. 10 mm [0.394 in] valve width. World's first valve to be equipped with reducer size fitting. A wide range of manifold specifications to meet user needs. F10 Series F10 Series Perfect for operation control electro-pneumatic relay of 2.5 to 10 mm [0.098 to 0.394 in] diameter single acting cylinders. 10 mm [0.394 in] valve width, 1.7 W low power consumption compact configuration solenoid valve. Solenoid valve 010E1 series Solenoid valve 010E1 series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. High reliability, even without lubrication. Solenoid valve 300 series Solenoid valve 300 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 182 series Solenoid valve 182 series For cylinder bore sizes up to 40 mm [1.575 in]. 10.5 mm [0.413 in] valve width. Thin, compact configuration. Advances the trend towards space-saving machinery and equipment. A tandem three-port valve that provides a high degree of added value. Solenoid valve JA series Solenoid valve JA series F10, F15, F18 Series. Low current type & single dual use valves offer energy saving and low price. 100+ million cycle life tested and rated directional control valve series that can switch direction of the cylinder ports and from double to single solenoid without any additional parts needed. The Selection Guide provides a summary of the 132 F Series – Indirect Acting Solenoid Valves. The F Series variations include: Direct Wiring, D-Sub, Flat Cable or Serial Communication Inline, Subbase, Mono Block and Split Type Manifold Switchable Output Ports Direct on Valve or Manifold Field Selectable Single or Double Solenoid Operation Available with Two 3-way Valves in One Body RoHS Compliance Solenoid Valve F Series Solenoid Valve F Series For cylinder bore sizes up to 25 mm [0.984 in]. 10 mm [0.394 in] valve width. Low power consumption: 0.55 W standard type, 0.15 W low current type. High-response type is also available to meet a wide range of needs and for professional-level control. EA / EB Series EA / EB Series Perfect for operation control of small-size actuators with a double acting or single acting cylinder bore sizes of 6 to 20 mm [0.236 to 0.787 in]. 030 / H030 series 030 / H030 series Optimal for cylinder bore sizes from 100 to 180 mm [3.937 to 7.087 in]. Next-generation compact, and thin 5-port solenoid valve with high flow rate. Switchable from double to single (two-position double solenoid specifications only). PA / PB Series PA / PB Series For cylinder bore sizes of 50 to 100 mm [1.969 to 3.937 in]. Perfect for operation control of middle-size actuators. A wide variety of lead wire connections and stacking manifolds. Solenoid valve 240 series Solenoid valve 240 series A versatile series that meets the needs of operation control of 20 to 80 mm [0.787 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 180 series Solenoid valve 180 series An external pilot system for versatile 2 and 3-port valves. Amazing versatility packed into a compact configuration. Solenoid valve 112 series Solenoid valve 112 series A versatile series that meets the needs of operation control of 20 to 40 mm [1.575 to 30150 in] diameter cylinders and a wide range of other applications. Solenoid valve 110 series Solenoid valve 110 series This product has received an order corresponding to for maintenance . Please contact your nearest sales office for more information . Solenoid valve 040 series Solenoid valve 040 series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue With guides Cylinder Axis cylinder XDA series Double acting bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less. Double acting bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less. Double acting long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less. Double acting double rod bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less. Double acting double rod bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less. Double acting double rod long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less. Next Cylinder With guides Double acting bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bushing type for non-rotating control of ±0.3 degrees or less. Double acting bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Bearing type for non-rotating control of ±0.1 degrees or less. Double acting long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Guides are incorporated into both sides of the cylinder. Long bearing type for non-rotating control of ±0.05 degrees or less. Double acting double rod bushing type. Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bushing type that has non-rotating control of ±0.3 degrees or less. Double acting double rod bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Bearing type that has non-rotating control of ±0.1 degrees or less. Double acting double rod long bearing type Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Long bearing type that has non-rotating control of ±0.01 degrees or less. Axis cylinder XDA series Axis cylinder XDA series Double acting type with guides Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Workpiece table with twin rod cylinder and seven guides for high accuracy, high rigidity, and high output. Shock absorber type with guides Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. A shock absorber at the stroke end absorbs end impact force and allows stroke adjustment. End keep type with guides Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Rod slider ARS series Rod slider ARS series Cylinder sensor compatible type with guides Φ6 to 20 mm [0.236 to 0.787 in] cylinder bore. Linear guide equipped in a square body provides space savings and non-rotating accuracy. High multi cylinders YMDAG series High multi cylinders YMDAG series Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Thin actuator with linear guide. Twin rod for high output. Z sider ZS series Z sider ZS series Double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of standard jig cylinders with guides. Easy to use, saves space. Stroke adjustment double acting type with guides φ6 [0.236], 8 [0.315], 10 [0.394] Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter (Φ6 [0.236], 8 [0.315], 10 [0.394] mm) lineup of stroke adjustment type standard jig cylinders with guides. Double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Perfect for use as a conveyor line stopper or lifter. A selection of four mounting types to match the mounting environment and two different port location directions. Stroke adjustment double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. With adjuster mechanism that can be used to limit the output side stroke. Jig cylinder with guide that is now even easier to use. End keep double acting type with guides Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Jig cylinder with guide SGDA series Jig cylinder with guide SGDA series Double acting type Φ4.5 to 32 mm [0.177 to 1.260 in] cylinder bore. Standard setter for table type with compact, high-rigidity linear guide. A wide range of variations enables a greater degree of mechanical design freedom. Side mounted double acting type Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block and short pitch mini guide slider that simplifies installation and piping. Double acting type with side-mounted buffer Φ4.5 to 10 mm [0.177 to 0.394 in] cylinder bore. Side mounting block, and short pitch mini guide slider setting and stroke out end error absorbing buffer. Double acting type with end keep Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure. Back side piping specification Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. Easy installation in locations where limited space is available. Back side piping specification with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Double acting type with stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in]cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side stroke adjustment buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with output side and input side stroke adjustments Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. Simple stroke fine-adjustment upon device startup. Double acting type with output side and input side stroke adjustment buffers Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. Cylinder with stroke limiting stopper. With a buffer that absorbs error on the stroke out end. Double acting type with buffer Φ4.5 to 20 mm [0.177 to 0.787 in] cylinder bore. With a buffer that absorbs error on the stroke out end. Double acting type with buffer and end keep Φ12 to 20 mm [0.472 to 0.787in] cylinder bore size. Equipped with a piping block that allows piping from behind the cylinder. With a buffer that absorbs error on the stroke out end. Mini guide sliders MGA series Mini guide sliders MGA series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Air Hands Cylinder Parallel type NHBDPG with linear guide Double acting type Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Next Cylinder Air Hands A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Air Picker Gripper Air Picker Gripper Big type with a hollow body inside a rubber cylinder that expands into a donut shape to grip and hold the inner diameter of the workpiece over a wide area. Pick type RBP Pick type RBP Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Wide type air hand WHDP Wide type air hand WHDP Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape. 180 Degree Open/Close Type NHBDSLG 180 Degree Open/Close Type NHBDSLG Air drive double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. Mechanical drive normally close single acting type Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. 3 finger hand with linear guide NHE Series 3 finger hand with linear guide NHE Series Double acting synchronous type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Rack-and-pinion mechanism enables synced left and right lever operation. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. Double acting Synchronous type (long type) Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Synchronous long stroke type. Linear guide for high rigidity and a thin body design that is perfect for a wide range of workpiece gripping. Double acting asynchronous type Φ8 to 12 mm [0.315 to 0.472 in] cylinder bore. Levers are individually driven by different bore size cylinders, and the lever with the stronger gripping force becomes the gripping fixed point. Linear guide for high rigidity and thin body design. Flat type air hand AFDPG with linear guide Flat type air hand AFDPG with linear guide Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDP Parallel type NHBDP Single acting normally closed Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Parallel type. Single acting normally open Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Two types: parallel type and parallel type linear guide specification. Parallel type NHBMP mechanical hands Parallel type NHBMP mechanical hands Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGY with linear guide Parallel type NHBDPGY with linear guide Double acting type Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPG with linear guide Parallel type NHBDPG with linear guide A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area. Grip type RBG Grip type RBG Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping. Mechanical drive hand with linear guide NHBM Mechanical drive hand with linear guide NHBM Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models. L hand with linear guide NHL1D L hand with linear guide NHL1D Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling. 180 Degree Open/Close type NHBDSL 180 Degree Open/Close type NHBDSL Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models. Parallel type NHC1 series Parallel type NHC1 series Double acting type Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Swing type NHBDS Swing type NHBDS Double acting type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Parallel type NHBDPA with cross roller bearing Parallel type NHBDPA with cross roller bearing Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGJ with linear guide Parallel type NHBDPGJ with linear guide Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Parallel type NHBDPGL with linear guide Parallel type NHBDPGL with linear guide RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Regulators Air Filters / Regulators Small FR series Regulators RN100-111 RN100-111 RDN100-111 Compact, lightweight regulator. Quick fitting for simple tube connection to the device. Next Air Filters / Regulators Regulators RN100-111 RDN100-111 Compact, lightweight regulator. Quick fitting for simple tube connection to the device. Small FR series Regulators RN100-111 Small FR series Regulators RN100-111 Air pressure can be controlled by electrical signals. P.W.M. control poppet type main unit structure enables non-bleeding. Supports easy air quality management and reliability, and long life. Electro Pneumatic Transducing Regulator ETR Electro Pneumatic Transducing Regulator ETR Perfect for pressure control of solvents used in liquid crystal and semiconductor processes, carrier gas in a pure water circuit, clean air, and gas, as well as other non-grease and non-oil essential lines. Stainless steel Regulator RS Stainless steel Regulator RS Compact yet with a stable pressure regulator with preset markers included as standard. Select from among standard pressure specification, integrated check mechanism, low-pressure specification. Multi series Regulators R150-602 Multi series Regulators R150-602 (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator RC Thread Mpa Gauge RZ Regulator RC Thread Mpa Gauge Compact design with convenient built-in quick fitting. With pressure gauge for simple pressure checks. Regulator with quick fitting RTS Regulator with quick fitting RTS Instant response, even when there change in the secondary side pressure is great. Uses an air pilot system. High-relief Regulators HR High-relief Regulators HR Large FRL Series regulator. Large FRL series Regulators RN650-902 Large FRL series Regulators RN650-902 (NPT thread , psi Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side spacing possible). Improved operation and maintenance. RZ Regulator NPT Thread Psi Gauge RZ Regulator NPT Thread Psi Gauge New Regulators with Quick Fittings are available! RTLP Regulators with Quick Fittings Push Lock type RTLP Regulators with Quick Fittings Push Lock type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Sensor Switch Cylinder Contact state sensor CS5T CS11T 2-lead wire ● Applicable cylinders: Knock cylinders, multi mount cylinders, dyna cylinders, SD cylinders, TDA, ORK, RAP, RAN, swing cylinders　 ZC201 ZC205 2-lead wire ● Applicable cylinders: Pen cylinders CS3M CS4M CS5M 2-lead wire ● Applicable cylinders: Slim cylinders, twin port cylinders, ORC, ORCA, ORGA, ORK, MRG, swing cylinders, twist cylinders CS3H CS4H CS5H 2-lead wire ● Applicable cylinders: J Series jig cylinders, slide units, SHM ZC301 ZC305 2-lead wire ● Applicable cylinders: AGTB, AGTC, ORCJ, MRC ZC601 ZC605 2-lead wire ● Applicable cylinders: Axis cylinders ZE101 ZE102 ZE201 ZE202 2-lead wire ● Applicable cylinders: C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, multi sliders, ORV, ORS, MRS, ORW, MRW, RAT CS2F CS3F CS4F CS5F 2-lead wire ● Applicable cylinders: Slim cylinders, dyna cylinders, swing cylinders CS2B CS3B CS4B CS5B 2-lead wire ● Reed sensor switch Next Cylinder Sensor Switch Sensing range is expanded. Allows cylinder position detection of workpieces of different widths, etc. Supports four-point switch output. Linear magnetic sensor controller Long Type ZL2 series Linear magnetic sensor controller Long Type ZL2 series Air cylinder stop position can be specified in 1/100 mm units. Combining with a counter enable history management based on workpiece acceptance/rejection judgment or data import. Stroke sensor ZM series Stroke sensor ZM series ZC130 ZC153 with LED ● Applicable cylinders: Knock cylinders, multi mount cylinders, pen cylinders dyna cylinders, SD cylinders, TDA, ORV, ORK, RAP, RAN, swing cylinders, air hand CHDUL, SHM ZC230 ZC253 with LED ● Applicable cylinders: Pen cylinders ZC330 ZC353 with LED ● Applicable cylinders: AGTB, AGTC ZG530 ZG553 with LED ● Applicable cylinders: Slim cylinders, twin port cylinders, ORC, ORCA, ORK, MRG, swing cylinders, twist cylinders ZC630 ZC653 with LED ● Applicable cylinders: Axis cylinders ZE135 ZE155 ZE235 ZE255 with LED ● Applicable cylinders: Mini bit, C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, ZS, ORV, ORS, MRS, ORW, MRW, NHB, WHDP, AFDPG, RAT ZE175 ZE275 3-lead wire, with LED ● Applicable cylinders: Mini bit, C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, ZS, ORV, ORS, MRS, ORW, MRW, NHB, WHDP, AFDPG, RAT ZB430 CS9H with LED ● Applicable cylinders: J Series jig cylinders, slide units, SHM Solid state sensor Solid state sensor Allows cylinder position detection of workpieces of different widths, etc. Supports four-point switch output. Allows simple position detection. Linear magnetic sensor controller ZL1 series Linear magnetic sensor controller ZL1 series CS5T CS11T 2-lead wire ● Applicable cylinders: Knock cylinders, multi mount cylinders, dyna cylinders, SD cylinders, TDA, ORK, RAP, RAN, swing cylinders　 ZC201 ZC205 2-lead wire ● Applicable cylinders: Pen cylinders CS3M CS4M CS5M 2-lead wire ● Applicable cylinders: Slim cylinders, twin port cylinders, ORC, ORCA, ORGA, ORK, MRG, swing cylinders, twist cylinders CS3H CS4H CS5H 2-lead wire ● Applicable cylinders: J Series jig cylinders, slide units, SHM ZC301 ZC305 2-lead wire ● Applicable cylinders: AGTB, AGTC, ORCJ, MRC ZC601 ZC605 2-lead wire ● Applicable cylinders: Axis cylinders ZE101 ZE102 ZE201 ZE202 2-lead wire ● Applicable cylinders: C jig cylinders, jig cylinders with guides, B twin rod cylinders, rod sliders, multi sliders, ORV, ORS, MRS, ORW, MRW, RAT CS2F CS3F CS4F CS5F 2-lead wire ● Applicable cylinders: Slim cylinders, dyna cylinders, swing cylinders CS2B CS3B CS4B CS5B 2-lead wire ● Reed sensor switch Contact state sensor Contact state sensor RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Blow Type (mini), Bar Type, Fan Type, Gun Type, Box Type Static electricity removal Koganei Ionizer Overview Next Static electricity removal Blow Type (mini), Bar Type, Fan Type, Gun Type, Box Type Koganei Ionizer Overview Koganei Ionizer Overview RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Rotary Actuators Cylinder Vane type RAN (Single vane /with sensor) Compact and lightweight for easy mounting. Makes devices more compact. Little air leaking, long life, no oil supply type. Next Cylinder Rotary Actuators Air operated index table that uses an air signal and latch mechanism for prescribed angle and prescribed direction rotation. Index table type RWT, ARWT Index table type RWT, ARWT Φ10 to 70 mm [0.394 to 2.756 in] cylinder bore size. Equipped with a cross roller bearing for high accuracy, high rigidity, low center of gravity, and thin configuration. With new pressure-resistant shock absorber for smooth end control. Piston type table type Flat rotary RAF Piston type table type Flat rotary RAF Lightweight, compact. Bearing provides high accuracy. Easy-to-use table type. Piston type table type RAT Piston type table type RAT Φ16 to 40 mm [0.630 to 1.575 in] cylinder bore. Dual tube structure centralizes connection ports on a single side and eliminates dead space. Twin Port TWDA series Twin Port TWDA series Bearings suppress vibration and deflection for high accuracy and high rigidity. A shock absorber can also be equipped for a compact system design. Vane type table type RAG Vane type table type RAG Compact and lightweight for easy mounting. Makes devices more compact. Little air leaking, long life, no oil supply type. Vane type RAN (Single vane /with sensor) Vane type RAN (Single vane /with sensor) Compact body with one-side surface piping for maximum space economy. Double rack type that eliminates backlash and leakage. Piston type RAP Piston type RAP RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Clean System equipment Cylinder Multi mount cylinders (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Next Cylinder Clean System equipment Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin rod cylinder TBDA (clean equipment) Twin rod cylinder TBDA (clean equipment) Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification. Parallel type NHBDPG (clean equipment) with linear guide Parallel type NHBDPG (clean equipment) with linear guide Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder. Twin rod cylinder TDA (clean equipment) Twin rod cylinder TDA (clean equipment) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Jig cylinder with guides (clean equipment Jig cylinder with guides (clean equipment Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Jig cylinder low-friction specification CDAZ (clean equipment) Jig cylinder low-friction specification CDAZ (clean equipment) Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option. Basic cylinders: With guide BCG (clean equipment) Basic cylinders: With guide BCG (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Multi mount cylinders (clean equipment) Multi mount cylinders (clean equipment) Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini bit cylinder MBDA (clean equipment) Mini bit cylinder MBDA (clean equipment) Rack-and-pinion type clean room specification rotary actuator. Piston type RAP (clean equipment) Piston type RAP (clean equipment) Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation. Flat rodless MRV (clean equipment) Flat rodless MRV (clean equipment) Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Mini guide slider MGA (clean equipment) Mini guide slider MGA (clean equipment) Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep. Slim cylinders (clean equipment) Slim cylinders (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Jig cylinder C series (clean equipment) Jig cylinder C series (clean equipment) Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. Double acting type basic cylinders BC (clean equipment) Double acting type basic cylinders BC (clean equipment) Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pen cylinder PBDA (clean equipment) Pen cylinder PBDA (clean equipment) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Clean System equipment Cylinder Jig cylinder with guides (clean equipment Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Next Cylinder Clean System equipment Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration. Twin rod cylinder TBDA (clean equipment) Twin rod cylinder TBDA (clean equipment) Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification. Parallel type NHBDPG (clean equipment) with linear guide Parallel type NHBDPG (clean equipment) with linear guide Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder. Twin rod cylinder TDA (clean equipment) Twin rod cylinder TDA (clean equipment) Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability. Jig cylinder with guides (clean equipment Jig cylinder with guides (clean equipment Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation. Jig cylinder low-friction specification CDAZ (clean equipment) Jig cylinder low-friction specification CDAZ (clean equipment) Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option. Basic cylinders: With guide BCG (clean equipment) Basic cylinders: With guide BCG (clean equipment) Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility. Multi mount cylinders (clean equipment) Multi mount cylinders (clean equipment) Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.) Mini bit cylinder MBDA (clean equipment) Mini bit cylinder MBDA (clean equipment) Rack-and-pinion type clean room specification rotary actuator. Piston type RAP (clean equipment) Piston type RAP (clean equipment) Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation. Flat rodless MRV (clean equipment) Flat rodless MRV (clean equipment) Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs. Mini guide slider MGA (clean equipment) Mini guide slider MGA (clean equipment) Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep. Slim cylinders (clean equipment) Slim cylinders (clean equipment) Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs. Jig cylinder C series (clean equipment) Jig cylinder C series (clean equipment) Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving. Double acting type basic cylinders BC (clean equipment) Double acting type basic cylinders BC (clean equipment) Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Pen cylinder PBDA (clean equipment) Pen cylinder PBDA (clean equipment) RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Water processing device Water processing device DB scale separator New water processing for clean tower circulation water. Water purification with new electrolysis technology, without using chemicals. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. Next Water processing device Water processing device New water processing for clean tower circulation water. Water purification with new electrolysis technology, without using chemicals. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. DB scale separator DB scale separator Water purification device with new electrolysis technology, without using chemicals incorporated into a small module. Low energy operation reduces CO2 emissions. Reduces cleaning costs. A host of other benefits. DB scale separator: Module type DB scale separator: Module type RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Combination Air Filters / Regulators Multi series Combinations FRL C150-600 FRL_C A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Next Air Filters / Regulators Combination A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Large FRL series Combinations CN Large FRL series Combinations CN FRL_C A lineup of all function needed for air treatment of usage end line. Combination air filter, regulator, and lubricator. Multi series Combinations FRL C150-600 Multi series Combinations FRL C150-600 iB-Cyclone+FRZ Series combination that completely eliminates the drain. The perfect choice to reduce your number of assemblies and space requirements CMZ Series CMZ Series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

Previous View PDF Catalogue Others Vacuum equipment, pad Vacuum Pump Unit EVP series EVP03 Series. Contributes to carbon neutrality! Next Vacuum equipment, pad Others Compact design, positive pressure type and negative pressure type available! SMP Smart Mini Compressor and Vacuum Pump SMP Smart Mini Compressor and Vacuum Pump Non-contact, which avoids denting of and damage to workpieces by the pad. Can also hold porous workpieces and workpieces with some unevenness. NCT Non contact transport equipment NCT Non contact transport equipment EVP03 Series. Contributes to carbon neutrality! Vacuum Pump Unit EVP series Vacuum Pump Unit EVP series RoHS-compliance Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006. On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances. Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.