DDAT - Double acting multi position type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified.

SIMILAR PRODUCTS

Consolidates electrical signals from the end of devices and enables communication with higher-level systems

I/O Terminal with EtherNet/IP or EtherCat for Koganei F-series valves

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes.

DDAW - Dual stroke double acting pull type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position.

DDAR - Double acting brake type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod.

DDAL - Non-rotating double acting type

Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.

DDAH - Low hydraulic pressure: Double acting type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston.

DDADL - Non-rotating double acting double rod type

Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.

DDA - Double acting type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving.

CCDA - Double acting long stroke type

Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.

CTA - Single acting pull

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.

CSAT - Single acting multi position push out type

Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.

CSA - Single acting push out type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.

CDAT - Double acting multi position type

Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving.

CDAL - Square rod double acting type

TDA_ALL - φ6 [0.236] Twin rod cylinder ● Φ6 mm [0.236 in] cylinder bore. Original rotation-less cylinder that integrates two cylinders into a compact configuration.

TDA - Twin rod cylinder

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified.

DDAT - Double acting multi position type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.

DDAP - Double acting push stroke adjustment type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

DDAK - End keep double acting type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.

DDAE - Double acting pull stroke adjustment type

Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston.

DDAD - Double acting double rod type

Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

CCDAK - End keep double acting type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CTAW - Dual stroke single acting pull type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CSAW - Dual stroke type single acting push type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.

CSAD - Single acting double rod type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CDAW - Dual stroke double acting pull type

Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving.

CDAL_6_8_10 - Non-rotating double acting type

Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.

CDAD - Double acting double rod type

RoHS-compliance

Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006.

On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances.

Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

​

​

DDAT - Double acting multi position type

SIMILAR PRODUCTS

​

​

RoHS-compliance