CCDA - Double acting long stroke type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving.

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be combined back-to-back for two operation strokes.

DDAW - Dual stroke double acting pull type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with brake mechanism to maintain intermediate stop and position.

DDAR - Double acting brake type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Hexagon type non-rotating piston rod.

DDAL - Non-rotating double acting type

Φ32 to 100 mm [1.260 to 3.937 in] cylinder bore. Conforms to ISO standards. Pneumatic-hydraulic converter can be used for simple low-speed operation control of a cylinder operated by low hydraulic pressure.

DDAH - Low hydraulic pressure: Double acting type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with non-rotating hexagon type piston rod and piston rods at both ends of the piston.

DDADL - Non-rotating double acting double rod type

Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. A wide range of series configurations and mountings that meet ISO standards make this the standard for tie rod medium-size cylinders.

DDA - Double acting type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Short, thin body designed for total space saving.

CCDA - Double acting long stroke type

Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.

CTA - Single acting pull

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.

CSAT - Single acting multi position push out type

Φ6 to 50 mm [0.236 to 1.969 in] cylinder bore. Single acting type with integrated return spring. Short, thin body designed for total space saving.

CSA - Single acting push out type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be linked in series and three stop positions can be specified. Short, thin body designed for total space saving.

CDAT - Double acting multi position type

Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Square type non-rotating piston rod with a short, thin body designed for total space saving.

CDAL - Square rod double acting type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Two cylinders can be linked in series and three stop positions can be specified.

DDAT - Double acting multi position type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.

DDAP - Double acting push stroke adjustment type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

DDAK - End keep double acting type

Φ40 to 100 mm [1.575 to 3.937 in] cylinder bore. Conforms to ISO standards. Cylinder with stroke limiting stopper.

DDAE - Double acting pull stroke adjustment type

Φ32 to 125 mm [1.260 to 4.921 in] cylinder bore. Conforms to ISO standards. Cylinder with piston rods on both ends of the piston.

DDAD - Double acting double rod type

Φ16 to 63 mm [0.630 to 2.480 in] cylinder bore. A mechanical lock is equipped in the cylinder on the stroke end to keep it from dropping down under its own weight when there is no pressure.

CCDAK - End keep double acting type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CTAW - Dual stroke single acting pull type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CSAW - Dual stroke type single acting push type

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.

CSAD - Single acting double rod type

Φ12 to 100 mm [0.472 to 3.937 in] cylinder bore size. Two cylinders can be combined back-to-back for two operation strokes. Designed for total space saving.

CDAW - Dual stroke double acting pull type

Φ6 to 10 mm [0.236 to 0.394 in] cylinder bore. Small-diameter cylinder with a guide for non-rotation equipped in the main body. A short, thin body designed for total space saving.

CDAL_6_8_10 - Non-rotating double acting type

Φ6 to 100 mm [0.236 to 3.937 in] cylinder bore. Cylinder with piston rods on both ends of the piston. Short, thin body designed for total space saving.

CDAD - Double acting double rod type

RoHS-compliance

Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006.

On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances.

Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

​

​

CCDA - Double acting long stroke type

​

​

RoHS-compliance