top of page
Abstract Background
Swing type NHBDS

Air Hands

Cylinder

Swing type NHBDS

Double acting type
Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Single acting normally open
Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Cylinder

Air Hands

A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area.

Air Picker Gripper

Air Picker Gripper
Big type with a hollow body inside a rubber cylinder that expands into a donut shape to grip and hold the inner diameter of the workpiece over a wide area.

Pick type RBP

Pick type RBP
Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Wide type air hand WHDP

Wide type air hand WHDP
Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. 180 degree open/close type. Employs a thrust bearing for high accuracy and high rigidity. Perfect for workpiece escape.

180 Degree Open/Close Type NHBDSLG

180 Degree Open/Close Type NHBDSLG
Air drive double acting type Φ16 to 25 mm [0.630 to 0.984 in] cylinder bore. Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc. Mechanical drive normally close single acting type Three-finger hand equipped with a linear guide improves allowable load and moment resistance. A hollow shaft makes this product perfect for building in a cylinder for workpiece removal, etc.

3 finger hand with linear guide NHE Series

3 finger hand with linear guide NHE Series
Double acting synchronous type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Rack-and-pinion mechanism enables synced left and right lever operation. Linear guide creates an accurate and rigid thin body, while double construction enables high gripping force. Double acting Synchronous type (long type) Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Synchronous long stroke type. Linear guide for high rigidity and a thin body design that is perfect for a wide range of workpiece gripping. Double acting asynchronous type Φ8 to 12 mm [0.315 to 0.472 in] cylinder bore. Levers are individually driven by different bore size cylinders, and the lever with the stronger gripping force becomes the gripping fixed point. Linear guide for high rigidity and thin body design.

Flat type air hand AFDPG with linear guide

Flat type air hand AFDPG with linear guide
Double acting type Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Parallel type NHBDP

Parallel type NHBDP
Single acting normally closed Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Parallel type. Single acting normally open Air piping is not required, making this perfect in areas where air piping is not possible (on an index table, etc.) Two types: parallel type and parallel type linear guide specification.

Parallel type NHBMP mechanical hands

Parallel type NHBMP mechanical hands
Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Finger type. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.

Parallel type NHBDPGY with linear guide

Parallel type NHBDPGY with linear guide
Double acting type Φ8 to 32 mm [0.315 to 1.26 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.

Parallel type NHBDPG with linear guide

Parallel type NHBDPG with linear guide
A hollow body inside donut shaped rubber expands inward to grip and hold the outer circumference of the workpiece over a wide area.

Grip type RBG

Grip type RBG
Equipped with linear guide and can be opened and closed by external operation. Mechanical hand that does not require air piping.

Mechanical drive hand with linear guide NHBM

Mechanical drive hand with linear guide NHBM
Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. With linear guide and cam drive for finger operation that is perpendicular to the cylinder operation axis. Twice the gripping power of previous models.

L hand with linear guide NHL1D

L hand with linear guide NHL1D
Φ12 to 25 mm [0.472 to 0.984 in] cylinder bore size. 180 degree finger type. Perfect for chucking and handling.

180 Degree Open/Close type NHBDSL

180 Degree Open/Close type NHBDSL
Φ10 to 25 mm [0.394 to 0.984 in] cylinder bore size. Perfect for high rigidity and high accuracy chucking and handling. 40% lighter, 45% smaller than previous models.

Parallel type NHC1 series

Parallel type NHC1 series
Double acting type Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ8 to 25 mm [0.315 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Swing type NHBDS

Swing type NHBDS
Double acting type Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design. Single acting normally open Φ6 to 25 mm [0.236 to 0.984 in] cylinder bore. Perfect for chucking and handling. Combination with cylinders allows easy robot arm design.

Parallel type NHBDPA with cross roller bearing

Parallel type NHBDPA with cross roller bearing
Double acting type Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling. Single acting normally open Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.

Parallel type NHBDPGJ with linear guide

Parallel type NHBDPGJ with linear guide
Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Linear guide equipped high-rigidity air hand that is perfect for chucking and handling.

Parallel type NHBDPGL with linear guide

Parallel type NHBDPGL with linear guide
Herb Plants
Herb Plants

RoHS-compliance

Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006.
 

On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances.
 

Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.

bottom of page