Clean System equipment

Cylinder

Piston type RAP (clean equipment)

Rack-and-pinion type clean room specification rotary actuator.

Cylinder

Clean System equipment

Φ10 to 32 mm [0.394 to 1.260 in] cylinder bore size. Twin rod cylinder clean room specification. Original rotation-less cylinder that integrates two cylinders into a compact configuration.

Twin rod cylinder TBDA (clean equipment)

Φ8 to 20 mm [0.315 to 0.787 in] cylinder bore. Air hand with linear guide, clean room specification.

Parallel type NHBDPG (clean equipment) with linear guide

Φ6 mm [0.236 in] cylinder bore. Clean room specification twin rod cylinder.

Twin rod cylinder TDA (clean equipment)

Φ12 to 63 mm [0.472 to 2.480 in] cylinder bore. Clean room jig cylinder with guide. With rolling guide for wide ranging applicability.

Jig cylinder with guides (clean equipment

Φ6 to 40 [0.236 to 1.575] cylinder bore. Jig cylinder C Series with low friction clean room specification. Provides both low pressure (0.01 to 0.1 MPa [1.45 to 14.5 psi] minimum working pressure) and low speed operation.

Jig cylinder low-friction specification CDAZ (clean equipment)

Φ8 to 40 mm [0.315 to 1.575 in]cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. Positioning pin hole can be selected as an option.

Basic cylinders: With guide BCG (clean equipment)

Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. A square and compact body, and mounting brackets provides plenty of mounting versatility.

Multi mount cylinders (clean equipment)

Φ4.5 to 10 [0.177 to 0.394] cylinder bore. Approximately 41% shorter length, 67% smaller volume. (Compared with Koganei multi mount cylinders.)

Mini bit cylinder MBDA (clean equipment)

Rack-and-pinion type clean room specification rotary actuator.

Piston type RAP (clean equipment)

Φ14 to 56 mm [0.551 to 2.205 in] cylinder bore. Magnet type rodless cylinder with clean room specification. Unique oval barrel design enables low-speed performance, low center of gravity, and non-rotation.

Flat rodless MRV (clean equipment)

Φ12 to 20 mm [0.472 to 0.787 in] cylinder bore size. Clean room specification mini guide slider. Table type linear guide specifications meet a wide range of needs.

Mini guide slider MGA (clean equipment)

Φ20 to 63 mm [0.787 to 2.480 in] cylinder bore. Clean room specification slim cylinder. A lineup including double acting type, double rod type, double acting type with end keep, double acting type with block, and double acting type with block and end keep.

Slim cylinders (clean equipment)

Φ12 to 50 mm [0.472 to 1.969 in] cylinder bore size. Jig cylinder C Series clean room specification with short, thin body designed for space saving. A wide range of functions respond to various different needs.

Jig cylinder C series (clean equipment)

Φ6 to 125 mm [0.236 to 4.921 in] cylinder bore. Clean equipment dust collection port type and type without dust collection port are available. A new cylinder with direct mounting for minimal size, minimal weight, and space saving.

Double acting type basic cylinders BC (clean equipment)

Double acting type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore. Clean room specification pen cylinder. Single acting push out type ● Φ6 to 16 mm [0.236 to 0.630 in] cylinder bore.

Pen cylinder PBDA (clean equipment)

RoHS-compliance

Koganei has finished to comply Koganei brand products to the RoHS directive which regulates 6 substances, and has been attaching the RoHS-compliant identification mark 'E' to shipped products since July 2006.

On June 4th 2015, there was a public notification through an official Gazette [EU2015/863] , informing that the target of regulation will be increased to 10 substances.

Koganei is preparing to manufacture products which comply to the RoHS (10 substances), and attach a RoHS-compliant identification mark 'G' to compliant products from July 2018.